Panasonic WJ-NT104 WJ-HD100 Digital Disk Recorder Control, E r 1 !2 !3 @4 @3 @2

■WJ-HD100 Digital Disk Recorder Control

It is enabled control of the WJ-HD100 disk recorder from the PC via the WJ-NT104 Network Interface Unit. (disabled control with PSoData)

Also refer to the operating instructions for the disk recorder together.

●Connections

•Fixed input selection mode

In this mode, only images from the MONITOR OUT connector of the disk recorder are available.

(1)Connect MONITOR OUT of the disk recorder to VIDEO IN 1 on the rear of the WJ-NT104.

(2)Connect the RS-232C ports (of the disk recorder and the WJ-NT104) with a RS-232C cable.

WJ-HD100

(MONITOR OUT)

	TIMER	HDD	MEMORY CARD
	ALARM	FULL
OPERATE	SUSPEND
	DAYLIGHT	LOCK
	SAVINGS

RS-232C

DB9 DB9

2......................... 3

3......................... 2

4......................... 6

5......................... 5

6......................... 4

7......................... 8

8......................... 7

WJ-NT104 (VIDEO IN1)

DISPLAY SELECT	SETUP/ESC			/	PUSH– PAUSE SET
	STOP	PLAY	REC		/

		OPERATE
PLAY MODE SELECT			LINK RCV	XMT
ALARM SEARCH STEP	REW/FF
LCD CONTRAST
/	/
Digital Disk Recorder WJ-HD		Network	Interface Unit	WJ-NT104

HD

HD

HD

HD

PC

PC

PC

PC

●Setup

In the SERIAL PORT SETUP window, set TYPE under RS-232C to “Serial through”. Set the same communication parame- ters as for the WJ-HD100 disk recorder.

In the MODE SETUP window, for VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark FIXED INPUT SELECTION MODE.

●Control Operation

Type the URL http://192.168.0.10/hd1index.html to access the WJ-HD100 CONTROL window for the disk recorder.

q w e r

yt u

i

o !0 !1 !2 !3

!5

!6

!7

!8

!9

@0

@1

@2

@4 @3 @2

67