Panasonic WJ-NT104 Mode Setup, Random Input Selection Mode, Multi Input Selection Mode

Page 41

■MODE SETUP

On the ADMINISTRATOR SETUP PAGE, click the MODE SETUP button to display the MODE SETUP window. Select the operation mode, image quality and camera control.

q e

r t

y

qVIDEO INPUT SELECTION MODE

Select an operation mode for the camera displayed on the monitor.

The factory default setting is RANDOM INPUT SELEC-

TION MODE.

wINPUT CHANNEL

This item is available in FIXED INPUT SELECTION MODE only. Select a channel for display on the moni- tor.

The factory default setting is CH1

eVIDEO INPUT CHANNEL ON/OFF

This item is available in RANDOM INPUT SELECTION MODE or MULTI INPUT SELECTION MODE only.

•RANDOM INPUT SELECTION MODE

Channels set to OFF will not be displayed. In sequence mode, such channels are skipped.

•MULTI INPUT SELECTION MODE

If a channel set to OFF is selected, the frame rate goes up because images are captured by skipping the channel set to OFF.

rINPUT CHANNEL SEQUENCE

This item is available in RANDOM INPUT SELECTION MODE only.

Set sequence operation to ON or OFF. The factory default setting is OFF.

tSEQUENCE INTERVAL

This item is available in RANDOM INPUT SELECTION MODE only. It defines the dwell time (time until changeover to the next channels) for sequence opera- tion.

Dwell time can be set to a value between 1 and 30 sec- onds in increments of 1 second.

The factory default setting is 2 Sec.

yMAIN PAGE DEFAULT INDEX FILE SELECT

Set the window to be displayed when only a URL is specified on the LOCATION bar.

Note: If OTHERS is marked, the name specified next to File name will open the MAIN PAGE window.

The factory default setting is index1.html

The factory default setting for channels are ON.

41

Image 41

Contents Operating Instructions Lightning flash with arrowhead sym Contents Preface FeaturesHandle the appliance with care PrecautionsRear View Front ViewSwitch Positions Mode selector Mode1RS-485 setup switches RS485 Setup 2Alarm input/output port AlarmMounting in a Rack InstallationsMounting one WJ-NT104 with the WV-Q204/1 Mounting two WJ-NT104 with the WV-Q204/2Mounting two WJ-NT104s Rack mounting screws Access from PCs via routers Access from a PC on the same subnetSystem Connections LAN Type ConnectionAccess from the WJ-NT104 to a Client PC Access from a Client PC to the WJ-NT104PPP Point to Point Protocol Type Connection Direct connection to the WJ-NT104Connection to a Client PC via Hub PreparationsDirect Connection to a PC without Hub PC Setup Page IP Address Setting via RS-232C Connection WJ-NT104 SetupIP Address Setting via LAN Connection Setup Procedures PPP Type Connection 1 P to P AccessRS-232C Setup Baud RATE, Data BIT, Stop BIT, PARITY, USE Flow ControlPage Connection Setup Access ProceduresTCP/IP protocol Dial-Up NetworkingPage Check TCP/IP in the Allowed network protocols field Access Procedures Windows NT Setup PPP Type Connection 2 Network AccessPage Windows98 Setup Main Page and Control Windows Main page and ControlsMulti Input Selection Mode Random Input Selection Mode¡Multi Input Selection Mode ¡Fixed Input Selection Mode Operation ModesSequence Mode Fixed Input Selection ModePush Mode Pull Mode and Push ModePull Mode Image Quality Picture Quality SetupImage Resolution Live image display Main page without Camera Control index1.htmlInput Select Quad Screen Mode Quad Screen Mode index4.htmlAlarm List Return to MainMain page with Camera Control index2.html Preset SelectPan/Tilt ZoomAutopan 0PRESETIris T y u U i o !0 Preset0AUTOPAN 1PRESETAlarm List Window Alarm FunctionSingle Frame Recording mode Alarm RecordingContinuous Recording after alarm mode Continuous Recording before/after alarm modeAlarm Image Readout Alarm NoticeMail Notice Panasonic Original Protocol Notice optionHow to Read Administrator Setup Setup ProceduresT y u i o !0 0CAMERA MenuMulti Input Selection Mode Mode SetupRandom Input Selection Mode 0 !1 0FRAME Speed Control for Push Mode1OUTPUT Data Rate Control 2CAMERA Control SelectI o !0 Network SetupR t Alarm Setup1CAMERA Preset 7SENDER Name 5ALARM Notice Smtp E-MAIL3ALARM Contact 6SERVER AddressE r t y O !0 !1 Serial Port Setup3DUPLEX Mode Modem Setup User Setup Host Setup E r FTP Client Setup2ALARM Image File Name Setup Alarm Setup0FTP ON/OFF 1TARGET DirectoryTime Date & Time SetupDate 0CAMERA Select Camera Menu SetupT y Connection Network SetupUtility Software Confirmation of the set values Operation Camera Menu SetupAccess Level Access AuthorizationControl of Access Authorization User Setup Window Host Setup WindowRegistration WJ-NT104 Authorized FunctionsFixed Input Selection Mode SetupExtension Functions WJ-FS616 Video Multiplexer Control2AUTO PAN 0FOCUS1IRIS Random Input Selection Mode WJ-SX550A/B/C Matrix Switcher ControlMulti Input Selection Mode Connections1 !2 !3 PasswordVIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup 1FOCUS 0ZOOM2IRIS 3AUTO PANWJ-DR200 AV Disk Recorder Control Selection ModeAlarm REC Standby Setup Control OperationTyu 0!5!1!6!2!7!3!8 Index1STOP 0REVERSE Play2PLAY 4RECE r 1 !2 !3 @4 @3 @2 WJ-HD100 Digital Disk Recorder Control1DATE 0SET2TIME 3SEARCHWJ-HD500 Digital Disk Recorder Control 5!6!7 @8 @7 @6 1ESC 0LEFT4DOWN 6SETContents Upload Image Display Control by Html DescriptionCGI function for image display Html Sample File mainview1.htmlHtml Sample File nsmainview1.html Camera OperationCGI functions related to camera operation Html HEAD/HEAD Body BGCOLOR=#FFFFCC CenterHtml Head Body BGCOLOR=#FFFFCC Center Titele Logo Image Html Sample File mainpanel1.htmlFont Body Html Quad ScreenScript Center Html Body BGCOLOR=#FFFFCC Center Html Sample File 2 camctrl.htmlHtml Sample File almctrl.html Alarm OperationCGI functions related to alarm Cgi-bin/chconv Substitute Character Strings in Http ServerOrdinary Html file get Cgi-bin/almctrl Ping IP address set in the WJ-NT104 TroubleshootingNetwork System PeripheralsMonitoring Browser Cctv Camera optionGeneral SpecificationsInput and Output HTTP, TCP/IP, PPP, FTP, SmtpPanasonic Canada Inc