Panasonic WJ-NT104 PPP Type Connection 1 P to P Access, Setup Procedures, RS-232C Setup

Page 16

■PPP Type Connection 1 (P to P ACCESS)

To use this mode, match the IP address of the PC with the address of the WJ-NT104.

The WJ-NT104 permits PPP (Point-to-Point Protocol) connection via a public line or the ISDN by connecting it to a modem or a terminal adapter (TA).

		RS-232C
RS-232C		cable
cable
Camera (max. 4)		Modem/TA
Modem/TA		Modem/TA
Modem/TA
WJ-NT104		PC
		PC
	Public lines	(Windows 95 etc.)
	Public lines

●Setup Procedures

To set up the PPP connection, access the WJ-NT104 from a PC via a LAN and open the ADMINISTRATOR SETUP PAGE.

If the WJ-NT104 is already connected to a LAN, go to the Location bar and specify http://192.168.0.10 (or IP address set previ- ously)/hwsetup.html to display the ADMINISTRATOR SETUP PAGE. If it is not yet connected to a LAN, connect to the LAN following the procedures described under "PREPARATIONS" (p. 12) and specify hwsetup.html to open the ADMINISTRATOR SETUP PAGE.

qOn the ADMINISTRATOR SETUP PAGE, click the [SERIAL PORT] button to open the SERIAL PORT SETUP dialog box.

RS-232C SETUP

TYPE: Select MODEM/TA

BAUD RATE, DATA BIT, STOP BIT, PARITY, USE FLOW CONTROL:

Set these items to match the settings of the modem/TA used. If the settings of the modem/ TA are unknown, set 57 600 bps (see note), 8 bit, 1 bit, NONE, and NONE, respectively.

Note: Set a baud rate (net nec.) close to that of the modem or TA connected. If there is a large differ- ence, it may take much longer for images to appear.

wClick the [SET&REBOOT] button to save the settings.

16

Image 16

Contents Operating Instructions Lightning flash with arrowhead sym Contents Features PrefacePrecautions Handle the appliance with careFront View Rear ViewMode selector Mode Switch Positions1RS-485 setup switches RS485 Setup 2Alarm input/output port AlarmInstallations Mounting in a RackMounting one WJ-NT104 with the WV-Q204/1 Mounting two WJ-NT104 with the WV-Q204/2Mounting two WJ-NT104s Rack mounting screws Access from a PC on the same subnet Access from PCs via routersSystem Connections LAN Type ConnectionAccess from a Client PC to the WJ-NT104 Access from the WJ-NT104 to a Client PCPPP Point to Point Protocol Type Connection Direct connection to the WJ-NT104Direct Connection to a PC without Hub PreparationsConnection to a Client PC via Hub PC Setup Page IP Address Setting via LAN Connection WJ-NT104 SetupIP Address Setting via RS-232C Connection PPP Type Connection 1 P to P Access Setup ProceduresRS-232C Setup Baud RATE, Data BIT, Stop BIT, PARITY, USE Flow ControlPage Access Procedures Connection SetupTCP/IP protocol Dial-Up NetworkingPage Check TCP/IP in the Allowed network protocols field Access Procedures PPP Type Connection 2 Network Access Windows NT SetupPage Windows98 Setup Main page and Controls Main Page and Control WindowsRandom Input Selection Mode Multi Input Selection Mode¡Multi Input Selection Mode ¡Fixed Input Selection Mode Operation ModesFixed Input Selection Mode Sequence ModePull Mode Pull Mode and Push ModePush Mode Image Resolution Picture Quality SetupImage Quality Input Select Main page without Camera Control index1.htmlLive image display Quad Screen Mode index4.html Quad Screen ModeAlarm List Return to MainPreset Select Main page with Camera Control index2.htmlPan/Tilt ZoomIris 0PRESETAutopan T y u Preset U i o !01PRESET 0AUTOPANAlarm Function Alarm List WindowAlarm Recording Single Frame Recording modeContinuous Recording after alarm mode Continuous Recording before/after alarm modeAlarm Notice Alarm Image ReadoutMail Notice Panasonic Original Protocol Notice optionSetup Procedures How to Read Administrator SetupT y u i o !0 0CAMERA MenuRandom Input Selection Mode Mode SetupMulti Input Selection Mode 0FRAME Speed Control for Push Mode 0 !11OUTPUT Data Rate Control 2CAMERA Control SelectNetwork Setup I o !0Alarm Setup R t5ALARM Notice Smtp E-MAIL 1CAMERA Preset 7SENDER Name3ALARM Contact 6SERVER Address3DUPLEX Mode Serial Port SetupE r t y O !0 !1 Modem Setup User Setup Host Setup FTP Client Setup E rAlarm Setup 2ALARM Image File Name Setup0FTP ON/OFF 1TARGET DirectoryDate Date & Time SetupTime T y Camera Menu Setup0CAMERA Select Utility Software Network SetupConnection Confirmation of the set values Camera Menu Setup OperationControl of Access Authorization Access AuthorizationAccess Level Host Setup Window User Setup WindowRegistration WJ-NT104 Authorized FunctionsSetup Fixed Input Selection ModeExtension Functions WJ-FS616 Video Multiplexer Control1IRIS 0FOCUS2AUTO PAN WJ-SX550A/B/C Matrix Switcher Control Random Input Selection ModeMulti Input Selection Mode ConnectionsVIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup Password1 !2 !3 0ZOOM 1FOCUS2IRIS 3AUTO PANSelection Mode WJ-DR200 AV Disk Recorder ControlSetup Control Operation Alarm REC StandbyTyu 0!5!1!6!2!7!3!8 Index0REVERSE Play 1STOP2PLAY 4RECWJ-HD100 Digital Disk Recorder Control E r 1 !2 !3 @4 @3 @20SET 1DATE2TIME 3SEARCHWJ-HD500 Digital Disk Recorder Control 5!6!7 @8 @7 @6 0LEFT 1ESC4DOWN 6SETContents Upload Control by Html Description Image DisplayCGI function for image display Html Sample File mainview1.htmlCamera Operation Html Sample File nsmainview1.htmlCGI functions related to camera operation Html HEAD/HEAD Body BGCOLOR=#FFFFCC CenterHtml Sample File mainpanel1.html Html Head Body BGCOLOR=#FFFFCC Center Titele Logo ImageScript Center Quad ScreenFont Body Html Html Sample File 2 camctrl.html Html Body BGCOLOR=#FFFFCC CenterCGI functions related to alarm Alarm OperationHtml Sample File almctrl.html Ordinary Html file get Substitute Character Strings in Http ServerCgi-bin/chconv Cgi-bin/almctrl Troubleshooting Ping IP address set in the WJ-NT104Peripherals Network SystemMonitoring Browser Cctv Camera optionSpecifications GeneralInput and Output HTTP, TCP/IP, PPP, FTP, SmtpPanasonic Canada Inc