Panasonic WJ-NT104 operating instructions Camera Menu Setup, Operation

Page 56

Camera Menu Setup

This is software to control the camera menu of the WV-CS654 and CS854 (optional).

It allows a user to open the menu of a camera connected to the WJ-NT104 with a coaxial cable and select preset position and other camera settings.

Camera

RS-232C cable

WJ-NT104

PC (DOS/V)

Operation

qConnect the RS-232C port on the front of the WJ-NT104 and the RS-232C port of the PC with an RS-232C cable.

wSet bits #7 and #9 of the MODE selector to ON position (leave the others on OFF), and then press the RESET button on the front of the WJ-NT104.

eClick the Start button, point to Programs and then WJ-NT104 Utilities. Click Camera Setup.

rSelect a channel under Camera Select.

tClick the [MENU ON/OFF] button, to open the Menu. Should it not appear, click the button repeatedly.

yUse [UP], [DOWN], [LEFT], [RIGHT], [ENTER], and [ESC] buttons to select a menu and execute a selected menu item. For menu operations and setup refer to the operation manual of the connected camera.

uThe [SPECIAL] button is effective only when the cursor points to SPECIAL on the camera menu.

iWhen the [Camera Control] button is depressed, a panel for Coaxial Camera Control appears. PAN/TILT, ZOOM, and FOCUS control are selectable only in the “position setting menu.”

oTo exit from the setup, press the [EXIT] button.

!0Return all switches on the MODE selector to OFF position and then press the RESET button on the front of the WJ-NT104. This completes setup and return to the normal application mode.

56

Image 56
Contents Operating Instructions Lightning flash with arrowhead sym Contents Features PrefacePrecautions Handle the appliance with careFront View Rear ViewMode selector Mode Switch Positions1RS-485 setup switches RS485 Setup 2Alarm input/output port AlarmInstallations Mounting in a RackMounting one WJ-NT104 with the WV-Q204/1 Mounting two WJ-NT104 with the WV-Q204/2Mounting two WJ-NT104s Rack mounting screws Access from a PC on the same subnet Access from PCs via routersSystem Connections LAN Type ConnectionAccess from a Client PC to the WJ-NT104 Access from the WJ-NT104 to a Client PCPPP Point to Point Protocol Type Connection Direct connection to the WJ-NT104Connection to a Client PC via Hub PreparationsDirect Connection to a PC without Hub PC Setup Page IP Address Setting via RS-232C Connection WJ-NT104 SetupIP Address Setting via LAN Connection PPP Type Connection 1 P to P Access Setup ProceduresRS-232C Setup Baud RATE, Data BIT, Stop BIT, PARITY, USE Flow ControlPage Access Procedures Connection SetupTCP/IP protocol Dial-Up NetworkingPage Check TCP/IP in the Allowed network protocols field Access Procedures PPP Type Connection 2 Network Access Windows NT SetupPage Windows98 Setup Main page and Controls Main Page and Control WindowsRandom Input Selection Mode Multi Input Selection Mode¡Multi Input Selection Mode ¡Fixed Input Selection Mode Operation ModesFixed Input Selection Mode Sequence ModePush Mode Pull Mode and Push ModePull Mode Image Quality Picture Quality SetupImage Resolution Live image display Main page without Camera Control index1.htmlInput Select Quad Screen Mode index4.html Quad Screen ModeAlarm List Return to MainPreset Select Main page with Camera Control index2.htmlPan/Tilt ZoomAutopan 0PRESETIris T y u Preset U i o !01PRESET 0AUTOPANAlarm Function Alarm List WindowAlarm Recording Single Frame Recording modeContinuous Recording after alarm mode Continuous Recording before/after alarm modeAlarm Notice Alarm Image ReadoutMail Notice Panasonic Original Protocol Notice optionSetup Procedures How to Read Administrator SetupT y u i o !0 0CAMERA MenuMulti Input Selection Mode Mode SetupRandom Input Selection Mode 0FRAME Speed Control for Push Mode 0 !11OUTPUT Data Rate Control 2CAMERA Control SelectNetwork Setup I o !0Alarm Setup R t5ALARM Notice Smtp E-MAIL 1CAMERA Preset 7SENDER Name3ALARM Contact 6SERVER AddressE r t y O !0 !1 Serial Port Setup3DUPLEX Mode Modem Setup User Setup Host Setup FTP Client Setup E rAlarm Setup 2ALARM Image File Name Setup0FTP ON/OFF 1TARGET DirectoryTime Date & Time SetupDate 0CAMERA Select Camera Menu SetupT y Connection Network SetupUtility Software Confirmation of the set values Camera Menu Setup OperationAccess Level Access AuthorizationControl of Access Authorization Host Setup Window User Setup WindowRegistration WJ-NT104 Authorized FunctionsSetup Fixed Input Selection ModeExtension Functions WJ-FS616 Video Multiplexer Control2AUTO PAN 0FOCUS1IRIS WJ-SX550A/B/C Matrix Switcher Control Random Input Selection ModeMulti Input Selection Mode Connections1 !2 !3 PasswordVIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup 0ZOOM 1FOCUS2IRIS 3AUTO PANSelection Mode WJ-DR200 AV Disk Recorder ControlSetup Control Operation Alarm REC StandbyTyu 0!5!1!6!2!7!3!8 Index0REVERSE Play 1STOP2PLAY 4RECWJ-HD100 Digital Disk Recorder Control E r 1 !2 !3 @4 @3 @20SET 1DATE2TIME 3SEARCHWJ-HD500 Digital Disk Recorder Control 5!6!7 @8 @7 @6 0LEFT 1ESC4DOWN 6SETContents Upload Control by Html Description Image DisplayCGI function for image display Html Sample File mainview1.htmlCamera Operation Html Sample File nsmainview1.htmlCGI functions related to camera operation Html HEAD/HEAD Body BGCOLOR=#FFFFCC CenterHtml Sample File mainpanel1.html Html Head Body BGCOLOR=#FFFFCC Center Titele Logo ImageFont Body Html Quad ScreenScript Center Html Sample File 2 camctrl.html Html Body BGCOLOR=#FFFFCC CenterHtml Sample File almctrl.html Alarm OperationCGI functions related to alarm Cgi-bin/chconv Substitute Character Strings in Http ServerOrdinary Html file get Cgi-bin/almctrl Troubleshooting Ping IP address set in the WJ-NT104Peripherals Network SystemMonitoring Browser Cctv Camera optionSpecifications GeneralInput and Output HTTP, TCP/IP, PPP, FTP, SmtpPanasonic Canada Inc