Panasonic WJ-NT104 Alarm Setup, 0FTP ON/OFF, 1TARGET Directory, 2ALARM Image File Name Setup

Page 51

DATE/TIME mode: added digits (month, date, hour, minute, second, and last 2-digit year).

Added MMDDhhmmsssYY (for example, 0123134500 101 for January 23 13:45:00.1, 2001) SEQUENTIAL NUMBER(MAX FIXED) mode: added number 00001 to 65535 automatically. SEQUENTIAL NUMBER(MAX VARIABLE) mode: added number between 00001 to max.(your setting number till 65535).

Is disabled to specify over 65535.

iTRANSFER INTERVAL

Specify the interval time for uploading the data periodi- cally.

Valid Value: seconds: between 0.2 and 1 with 0.1 increment

between 1 and 3600 with 1 increment

minutes: between 1 and 1440

For examples: 1min and 30sec: set 90 sec.

2 hours:

set 120 min.

Notes:

It is disabled to specify the time in combination with the minutes and seconds.

It may occur that uploading is disabled with the specified duration through the line status.

oFTP CHANNEL SELECT

You can specify the input channel for uploading when the multi input selection mode is set in the MODE SETUP window.

ON: Enables uploading.

OFF: Disables uploading. The factory defaults are OFF.

Alarm Setup

!0FTP ON/OFF

Selects to enable or disable alarm image upload with the FTP when an alarm is received.

ON: Enables alarm upload.

OFF: Disables alarm upload.

The factory default is ON.

!1TARGET DIRECTORY

Specifies the absolute path for the directory of the FTP server when uploading the alarm images.

Note: There are 3 alarm recording modes available, Single Frame, Continuous (post-images), and Continuous (pre and post-images) recording. It is enabled to specify the directory of FTP server for normal and alarm status, and store the uploading images separately.

!2ALARM IMAGE FILE NAME SETUP

Enter the desired image file name in the box.

The file name consists of x(image file name)✽✽✽✽✽✽. jpg

x:camera CH number (1 – 4)

FIXED mode: Only the image file name, no addition

✽✽✽✽✽✽.

DATE/TIME mode: added digits (month, date, hour, minute, second, and last 2-digit year).

Added MMDDhhmmsssYY (for example, 0123134500101 for January 23 13:45:00.1, 2001)

SEQUENTIAL NUMBER(MAX FIXED) mode: added

number 00001 to 65535 automatically.

SEQUENTIAL NUMBER(MAX VARIABLE) mode:

added number between 00001 to max.(your setting number till 65535).

Is disabled to specify over 65535.

Note: This FTP client function can support the FTP server such as Windows 2000, Windows NT, Free BSD, Turbolinux, and Red Hat Linux.

51

Image 51
Contents Operating Instructions Lightning flash with arrowhead sym Contents Preface FeaturesHandle the appliance with care PrecautionsRear View Front View2Alarm input/output port Alarm Mode selector ModeSwitch Positions 1RS-485 setup switches RS485 SetupMounting two WJ-NT104 with the WV-Q204/2 InstallationsMounting in a Rack Mounting one WJ-NT104 with the WV-Q204/1Mounting two WJ-NT104s Rack mounting screws LAN Type Connection Access from a PC on the same subnetAccess from PCs via routers System ConnectionsDirect connection to the WJ-NT104 Access from a Client PC to the WJ-NT104Access from the WJ-NT104 to a Client PC PPP Point to Point Protocol Type ConnectionPreparations Direct Connection to a PC without HubConnection to a Client PC via Hub PC Setup Page WJ-NT104 Setup IP Address Setting via LAN ConnectionIP Address Setting via RS-232C Connection Baud RATE, Data BIT, Stop BIT, PARITY, USE Flow Control PPP Type Connection 1 P to P AccessSetup Procedures RS-232C SetupPage Dial-Up Networking Access ProceduresConnection Setup TCP/IP protocolPage Check TCP/IP in the Allowed network protocols field Access Procedures Windows NT Setup PPP Type Connection 2 Network AccessPage Windows98 Setup Main Page and Control Windows Main page and ControlsOperation Modes Random Input Selection ModeMulti Input Selection Mode ¡Multi Input Selection Mode ¡Fixed Input Selection ModeSequence Mode Fixed Input Selection ModePull Mode and Push Mode Pull ModePush Mode Picture Quality Setup Image ResolutionImage Quality Main page without Camera Control index1.html Input SelectLive image display Return to Main Quad Screen Mode index4.htmlQuad Screen Mode Alarm ListZoom Preset SelectMain page with Camera Control index2.html Pan/Tilt0PRESET IrisAutopan T y u U i o !0 Preset0AUTOPAN 1PRESETAlarm List Window Alarm FunctionContinuous Recording before/after alarm mode Alarm RecordingSingle Frame Recording mode Continuous Recording after alarm modePanasonic Original Protocol Notice option Alarm NoticeAlarm Image Readout Mail Notice0CAMERA Menu Setup ProceduresHow to Read Administrator Setup T y u i o !0Mode Setup Random Input Selection ModeMulti Input Selection Mode 2CAMERA Control Select 0FRAME Speed Control for Push Mode0 !1 1OUTPUT Data Rate ControlI o !0 Network SetupR t Alarm Setup6SERVER Address 5ALARM Notice Smtp E-MAIL1CAMERA Preset 7SENDER Name 3ALARM ContactSerial Port Setup 3DUPLEX ModeE r t y O !0 !1 Modem Setup User Setup Host Setup E r FTP Client Setup1TARGET Directory Alarm Setup2ALARM Image File Name Setup 0FTP ON/OFFDate & Time Setup DateTime Camera Menu Setup T y0CAMERA Select Network Setup Utility SoftwareConnection Confirmation of the set values Operation Camera Menu SetupAccess Authorization Control of Access AuthorizationAccess Level WJ-NT104 Authorized Functions Host Setup WindowUser Setup Window RegistrationWJ-FS616 Video Multiplexer Control SetupFixed Input Selection Mode Extension Functions0FOCUS 1IRIS2AUTO PAN Connections WJ-SX550A/B/C Matrix Switcher ControlRandom Input Selection Mode Multi Input Selection ModePassword VIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup1 !2 !3 3AUTO PAN 0ZOOM1FOCUS 2IRISWJ-DR200 AV Disk Recorder Control Selection ModeIndex Setup Control OperationAlarm REC Standby Tyu 0!5!1!6!2!7!3!84REC 0REVERSE Play1STOP 2PLAYE r 1 !2 !3 @4 @3 @2 WJ-HD100 Digital Disk Recorder Control3SEARCH 0SET1DATE 2TIMEWJ-HD500 Digital Disk Recorder Control 5!6!7 @8 @7 @6 6SET 0LEFT1ESC 4DOWNContents Upload Html Sample File mainview1.html Control by Html DescriptionImage Display CGI function for image displayHtml HEAD/HEAD Body BGCOLOR=#FFFFCC Center Camera OperationHtml Sample File nsmainview1.html CGI functions related to camera operationHtml Head Body BGCOLOR=#FFFFCC Center Titele Logo Image Html Sample File mainpanel1.htmlQuad Screen Script CenterFont Body Html Html Body BGCOLOR=#FFFFCC Center Html Sample File 2 camctrl.htmlAlarm Operation CGI functions related to alarmHtml Sample File almctrl.html Substitute Character Strings in Http Server Ordinary Html file getCgi-bin/chconv Cgi-bin/almctrl Ping IP address set in the WJ-NT104 TroubleshootingCctv Camera option PeripheralsNetwork System Monitoring BrowserHTTP, TCP/IP, PPP, FTP, Smtp SpecificationsGeneral Input and OutputPanasonic Canada Inc