Panasonic CF-72 operating instructions Setup Windows after reinstalling, Ctrl + Alt + Del, F10

Page 24

<When using the USB floppy disk drive>

1Turn the computer off and connect the floppy disk drive to the computer.

2Set the FIRSTAID FD into the floppy disk drive and turn the computer on.

Follow the on-screen instructions.

Windows NT Windows 2000

When the message “Insert media 2...” is displayed, insert Product Recovery CD-ROM 2 after removing Product Re- covery CD-ROM 1, and then immediately press [OK].

NOTE

If [OK] is not immediately pressed:

The message “The media does not contain the cor- rect file” may appear. In such cases, the message “Insert media 2...” is displayed again when [OK] is pressed. Confirm that Product Recovery CD-ROM 2 has been inserted by opening the tray of the CD- ROM/DVD-ROM drive, and then close the tray and immediately press [OK].

10After the reinstallation procedure completes, the follow- ing message will appear on the display.

Windows 98 Windows NT

All data on the whole HDD has been restored to the factory default. After removing floppy disk and the Product Recovery CD-ROM, restart the computer and set up Windows again.

Remove the disk, then restart the computer by pressing

Ctrl + Alt + Del .

Windows 2000

Windows2000 install wizard will start after reboot.

Restore process will execute more after Windows2000 install wizard.

After removing the Product Recovery CD, power off your computer.

Replace the CD-ROM pack with the SDD.

Turn your computer on to continue re-installation.

After the reinstallation procedure completes, the follow- ing message will appear on the display. Remove the floppy disk or Product Recovery CD-ROM, then restart the computer by pressing Ctrl + Alt + Del .

(When using the USB floppy disk drive, disconnect it.)

11Windows NT

Restart the computer automatically.

If the message "Preinstallation completed successfully. Press any key to shut down/reboot." is displayed, press any key.

12

When the message [Press <F2> to enter SETUP] is dis-

 

played, press F2 and then run the Setup Utility.

 

If the password has been set, enter the Supervisor Pass-

 

word.

 

13

Press

F9 .

 

At the confirmation message, select [Yes] and press

 

Enter . (The Setup Utility settings will return to their

 

default values. Even the security settings with the excep-

 

tion of the password(s) will return to their default values.)

 

Change the settings where necessary.

14

Press

F10 .

At the confirmation message, select [Yes] and press Enter .

15Perform the setup procedure for Windows by following the

instructions on the screen.

 

Windows 98

Windows 2000

page 16

Windows NT

Described below

NOTE

When the message [Operating System not found] is displayed, press Ctrl + Alt + Del

and perform the operations from Step 13 to Step 15. If you fail to press F2 in Step 12, restart the computer

and perform the operations from Step 12 to Step 14 after finishing Windows setup procedure.

Windows NT

Setup Windows after reinstalling

1The Software License Agreement will be displayed. After reading the agreement, select [I Agree].

NOTE

If [I Disagree] is selected, the Windows setup will be aborted.

Moving the cursor ( ) or clicking buttons can be performed with the touch pad.

2Select [Next].

3Input your name and organization, then select [Next]. (It is possible to omit the organization item.)

4Input the Product ID written down earlier, then select [Next].

To move the cursor to a particular item, press Tab or click the desired box.

5Input your computer name and select [Next].

6Input an Administrator password and select [Next].

CAUTION

Remember this password! If the password is for- gotten, Windows NT cannot be operated.

7Select [Next].

8Select [Do not connect this computer to a network at this time], then select [Next].

(Settings can be made for a network even after Win- dows starts up. In this case, be sure to read [When Adding New Software or Hardware Components] in the Reference Manual [Technical Information].)

When establishing settings for a network:

The settings will vary for different network environ- ments depending on the network system being used. For more details, ask your system administrator or the person in charge of the network. Follow the on- screen instructions.

(If the LAN driver is in the floppy disk, install the driver by using the floppy disk drive after Windows Setup.)

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operating Instructions Disclaimer & Safety Notice How to replace the fuseFor U.K CopyrightModem Compliance Notice Compliance Notice CE MarkAC Cord Battery Pack Parts InclusionOperating Windows InstructionsInformation Saving Data on the Hard DiskSaving Data on Disks Computer VirusesNames & Functions of Parts Expansion Bus Connector DC-IN Jack USB PortsInternal LAN RAM Module SlotLimited USE License Agreement Specifications Main SpecificationsOther Specifications Declaration of Conformity Contents EnglishPrecautions Lithium BatteryCD-ROM/DVD-ROM Drive Caution Precautions Battery Pack Connect your computer to a power outlet First-time OperationWrite down the Product Key or Product ID Read the Limited USE License AgreementSetup Windows Power Indicator Power SwitchFirst-time Operation Open the displayAt the Getting started with Windows Install the Acrobat Reader This concludes the first-time use operation guidelinesPower off your computer Place a label identifying the contents on each diskNames of created Backup Disk Eject ButtonTouch Pad Basic Operation Basic OperationHandling the Touch Pad Work SurfaceAreas with extremely high/low temperatures Reference ManualUsage Environment EnvironmentGeneral Issues Handling MaintenanceTouch Pad DisplayReinstalling Software Before ReinstallationReinstalling PreparingSetup Windows after reinstalling When establishing settings for a networkCtrl + Alt + Del F10Ctrl Alt + Neuinstallieren von Software DeutschVorsichtsmaßnahmen Inbetriebnahme EinleitungVorsichtsmaßnahmen LithiumbatterieCD-ROM/DVD-ROM-Laufwerk Vorsichtsmaßnahmen Akkupack Inbetriebnahme Lesen Sie die LIZENZVEREINBARUNG. SeiteLegen Sie das Akkupack ein Schließen Sie das Notebook ans Netz anInbetriebnahme Öffnen Sie das DisplaySchalten Sie das Notebook ein Richten Sie Windows einIm Bildschirm Getting Started with Windows Installieren Sie Acrobat Reader Ende der Hinweise zur InbetriebnahmeErstellen von BACKUP-Disketten für die Neuinstallation Schalten Sie das Notebook ausAuswurftaste Mit der beschriftetenTouch-PadGrundfunktionen BedienungHandhabung des Touch-Pads Handbuch Öffnen des HandbuchsArbeitsumgebung UmgebungAllgemeines HandhabungWartung Touch-PadNeuinstallieren von Software Vor der NeuinstallationNeuinstallation VorbereitungenStrg + Alt + Entf Einstellungen für ein NetzwerkInstallieren Sie Acrobatr Reader 4.0 Seite Réinstallation du logiciel FrançaisPrécautions d’utilisation Prise en main Illustrations et terminologie utilisées dans ce manuelPrécautions d’utilisation Batterie au lithiumPrécautions batterie Prise en main Lisez le Contrat DE Licence Pour Utilisation LimitéeInsérez la batterie Branchez l’ordinateur sur une prise secteurConfigurez Windows Prise en mainOuvrez l’écran Allumez votre ordinateurAppuyez sur Exit pour la refermer Installez Acrobatr Reader Ceci conclut les conseils de prise en mainMettez l’ordinateur hors tension Bouton d’éjectionPavé tactileFonctionnement de base Fonctionnement de basePrécautions concernant le pavé tactile Manuel de référence Environnement d’utilisationEnvironnement Endroits où ne pas utiliser votre ordinateurConseils pratiques ManipulationEntretien Pavé tactile AffichageRéinstallation du logiciel Avant la réinstallationRéinstallation PréparationConfiguration de Windows après la réinstallation Alt + EffCtrl Reinstallazione del Software ItalianoPrecauzioni Utilizzo del computer per la prima volta IntroduzionePrecauzioni Batteria al Litio PrecauzioniPrecauzioni Batteria Annotare il codice Product Key o il Numero di serie Leggere l’ACCORDO DI Licenza D’USO Limitato paginaInserire la batteria Collegare il computer a una presa d’alimentazioneInstallare Windows Utilizzo del computer per la prima voltaSollevare lo schermo Accendere il computerNella Getting Started with Windows Installare Acrobat Reader Spegnere il computer Pulsante di espulsioneTouchpad Funzionamento di Base Funzionamento di baseUso del touchpad Superficie di lavoroLuoghi con temperature estremamente alte o basse Manuale di riferimentoAmbiente d’utilizzo AmbienteProblematiche generali ManeggiamentoManutenzione SchermoReinstallazione del Software Prima della reinstallazioneReinstallazione PreparazioneConfigurare Windows al termine della reinstallazione Ctrl + Alt + CancAlt + Canc

CF-72 specifications

The Panasonic CF-72 is a rugged laptop that stands out in the realm of mobile computing, particularly tailored for professionals who require reliability in harsh environments. Launched as part of Panasonic's Toughbook series, the CF-72 is renowned for its robust construction and advanced technology features that cater to various industries, including field service, law enforcement, and military applications.

One of the standout characteristics of the CF-72 is its durability. Built to meet stringent MIL-STD-810F military standards, this laptop can withstand shocks, vibrations, and extreme temperatures, making it ideal for outdoor use. Moreover, its spill-resistant keyboard and reinforced design provide additional protection against accidental damage, ensuring that the device can handle the rigors of daily use in challenging conditions.

In terms of performance, the CF-72 is equipped with powerful hardware that includes Intel processors, enabling efficient multitasking and high-performance computing. With options for solid-state drives (SSDs), users benefit from faster boot times and improved data access speeds, resulting in enhanced productivity. The system supports various configurations, making it versatile enough to meet the specific needs of different users.

The CF-72's display is another impressive feature. Its sunlight-readable screen, often featuring a high resolution, ensures visibility even in bright daylight, which is crucial for professionals working outdoors. Additionally, the laptop incorporates advanced touchscreen technology that provides intuitive navigation and interaction, enhancing the user experience significantly.

Connectivity is also a key feature of the CF-72. The laptop comes with a range of ports, including USB, HDMI, and Ethernet, allowing for seamless integration with other devices and networks. Furthermore, options for built-in cellular connectivity enable users to stay connected in remote areas, ensuring constant access to essential data and communication tools.

The CF-72 also prioritizes security, with features such as a smart card reader, fingerprint scanner, and TPM chip, providing enhanced data protection for sensitive information. This makes it an ideal choice for industries that handle confidential data, such as finance and healthcare.

In summary, the Panasonic CF-72 is a rugged mobile computing solution that combines advanced technology with durability and security. Its blend of powerful performance, exceptional display quality, and versatile connectivity make it an indispensable tool for professionals who operate in demanding environments, ensuring that they have a reliable partner for their computing needs.
Top Page Image Contents