Panasonic CF-72 First-time Operation, Write down the Product Key or Product ID

Page 15

First-time Operation

Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations.

1 Write down the Product Key or Product ID

Write down the number shown on the “Certificate of Authenticity” located on the bottom of the computer.

2 Read the LIMITED USE LICENSE AGREEMENT (page 8)

Before removing the seal covering the power switch, read the LIMITED USE LICENSE

AGREEMENT.

2

Latch

3 Insert the battery pack

Cover

1 Turn your computer over.

2Slide the latch, and then without releasing it, slide and remove the battery pack

cover.

3

3 Insert the battery pack into the computer with the label-side down.

CAUTION

Be sure the battery pack is properly connected to the connector.

Do not allow the battery connector to touch any portion of the computer.

The computer may not operate properly.

Label-side down

4

Mark

4Match the mark on the battery pack cover to the mark on the computer and slide the cover back into place.

CAUTION

If the cover is not attached properly, the battery may fall out while the computer is being carried.

4 Connect your computer to a power outlet

CAUTION

Be sure the AC adaptor is connected until completing step 7 on page 16.

Handling the AC adaptor

Do not twist or pull the AC power cord forcefully. Doing so may damage the connections.

Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.

When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet.

Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operating Instructions Copyright Disclaimer & Safety NoticeHow to replace the fuse For U.KCompliance Notice CE Mark Modem Compliance NoticeInstructions AC Cord Battery PackParts Inclusion Operating WindowsComputer Viruses InformationSaving Data on the Hard Disk Saving Data on DisksNames & Functions of Parts RAM Module Slot Expansion Bus ConnectorDC-IN Jack USB Ports Internal LANLimited USE License Agreement Main Specifications SpecificationsOther Specifications Declaration of Conformity English ContentsPrecautions Lithium BatteryCD-ROM/DVD-ROM Drive Caution Precautions Battery Pack Read the Limited USE License Agreement Connect your computer to a power outletFirst-time Operation Write down the Product Key or Product IDOpen the display Setup WindowsPower Indicator Power Switch First-time OperationAt the Getting started with Windows This concludes the first-time use operation guidelines Install the Acrobat ReaderEject Button Power off your computerPlace a label identifying the contents on each disk Names of created Backup DiskWork Surface Touch Pad Basic OperationBasic Operation Handling the Touch PadEnvironment Areas with extremely high/low temperaturesReference Manual Usage EnvironmentDisplay General IssuesHandling Maintenance Touch PadPreparing Reinstalling SoftwareBefore Reinstallation ReinstallingF10 Setup Windows after reinstallingWhen establishing settings for a network Ctrl + Alt + DelCtrl Alt + Einleitung Neuinstallieren von SoftwareDeutsch Vorsichtsmaßnahmen InbetriebnahmeVorsichtsmaßnahmen LithiumbatterieCD-ROM/DVD-ROM-Laufwerk Vorsichtsmaßnahmen Akkupack Schließen Sie das Notebook ans Netz an InbetriebnahmeLesen Sie die LIZENZVEREINBARUNG. Seite Legen Sie das Akkupack einRichten Sie Windows ein InbetriebnahmeÖffnen Sie das Display Schalten Sie das Notebook einIm Bildschirm Getting Started with Windows Ende der Hinweise zur Inbetriebnahme Installieren Sie Acrobat ReaderMit der beschrifteten Erstellen von BACKUP-Disketten für die NeuinstallationSchalten Sie das Notebook aus AuswurftasteTouch-PadGrundfunktionen BedienungHandhabung des Touch-Pads Umgebung HandbuchÖffnen des Handbuchs ArbeitsumgebungTouch-Pad AllgemeinesHandhabung WartungVorbereitungen Neuinstallieren von SoftwareVor der Neuinstallation NeuinstallationEinstellungen für ein Netzwerk Strg + Alt + EntfInstallieren Sie Acrobatr Reader 4.0 Seite Illustrations et terminologie utilisées dans ce manuel Réinstallation du logicielFrançais Précautions d’utilisation Prise en mainBatterie au lithium Précautions d’utilisationPrécautions batterie Branchez l’ordinateur sur une prise secteur Prise en mainLisez le Contrat DE Licence Pour Utilisation Limitée Insérez la batterieAllumez votre ordinateur Configurez WindowsPrise en main Ouvrez l’écranAppuyez sur Exit pour la refermer Ceci conclut les conseils de prise en main Installez Acrobatr ReaderBouton d’éjection Mettez l’ordinateur hors tensionPavé tactileFonctionnement de base Fonctionnement de basePrécautions concernant le pavé tactile Endroits où ne pas utiliser votre ordinateur Manuel de référenceEnvironnement d’utilisation EnvironnementPavé tactile Affichage Conseils pratiquesManipulation EntretienPréparation Réinstallation du logicielAvant la réinstallation RéinstallationAlt + Eff Configuration de Windows après la réinstallationCtrl Introduzione Reinstallazione del SoftwareItaliano Precauzioni Utilizzo del computer per la prima voltaBatteria al Litio Precauzioni PrecauzioniPrecauzioni Batteria Collegare il computer a una presa d’alimentazione Annotare il codice Product Key o il Numero di serieLeggere l’ACCORDO DI Licenza D’USO Limitato pagina Inserire la batteriaAccendere il computer Installare WindowsUtilizzo del computer per la prima volta Sollevare lo schermoNella Getting Started with Windows Installare Acrobat Reader Pulsante di espulsione Spegnere il computerSuperficie di lavoro Touchpad Funzionamento di BaseFunzionamento di base Uso del touchpadAmbiente Luoghi con temperature estremamente alte o basseManuale di riferimento Ambiente d’utilizzoSchermo Problematiche generaliManeggiamento ManutenzionePreparazione Reinstallazione del SoftwarePrima della reinstallazione ReinstallazioneCtrl + Alt + Canc Configurare Windows al termine della reinstallazioneAlt + Canc

CF-72 specifications

The Panasonic CF-72 is a rugged laptop that stands out in the realm of mobile computing, particularly tailored for professionals who require reliability in harsh environments. Launched as part of Panasonic's Toughbook series, the CF-72 is renowned for its robust construction and advanced technology features that cater to various industries, including field service, law enforcement, and military applications.

One of the standout characteristics of the CF-72 is its durability. Built to meet stringent MIL-STD-810F military standards, this laptop can withstand shocks, vibrations, and extreme temperatures, making it ideal for outdoor use. Moreover, its spill-resistant keyboard and reinforced design provide additional protection against accidental damage, ensuring that the device can handle the rigors of daily use in challenging conditions.

In terms of performance, the CF-72 is equipped with powerful hardware that includes Intel processors, enabling efficient multitasking and high-performance computing. With options for solid-state drives (SSDs), users benefit from faster boot times and improved data access speeds, resulting in enhanced productivity. The system supports various configurations, making it versatile enough to meet the specific needs of different users.

The CF-72's display is another impressive feature. Its sunlight-readable screen, often featuring a high resolution, ensures visibility even in bright daylight, which is crucial for professionals working outdoors. Additionally, the laptop incorporates advanced touchscreen technology that provides intuitive navigation and interaction, enhancing the user experience significantly.

Connectivity is also a key feature of the CF-72. The laptop comes with a range of ports, including USB, HDMI, and Ethernet, allowing for seamless integration with other devices and networks. Furthermore, options for built-in cellular connectivity enable users to stay connected in remote areas, ensuring constant access to essential data and communication tools.

The CF-72 also prioritizes security, with features such as a smart card reader, fingerprint scanner, and TPM chip, providing enhanced data protection for sensitive information. This makes it an ideal choice for industries that handle confidential data, such as finance and healthcare.

In summary, the Panasonic CF-72 is a rugged mobile computing solution that combines advanced technology with durability and security. Its blend of powerful performance, exceptional display quality, and versatile connectivity make it an indispensable tool for professionals who operate in demanding environments, ensuring that they have a reliable partner for their computing needs.
Top Page Image Contents