Panasonic UB-5315 installation manual Installing the Thermal Transfer Film

Page 11

Installing the Thermal Transfer Film

English

Blue gear

White shaft

4

Blue gear

3) Place the blue gear on the front right groove.

4)Place the white shaft on both sides of the back grooves.

Tighten the film, then close the printer door.

1)Rotate the blue gear in the direction of the arrow to take up the slack on the film.

• If a slack remains, perform step 3-2) through 4-1) again.

2)Securely close the printer door by using both hands until a click is heard.

	• “ ” flashing on the Multi-Copy/Error Indicator will go
Latches	out.
Latches

Notes

•If “ ” is still flashing after closing the printer door, make sure that the thermal transfer film has been installed properly and tightened.

•The printer door should be closed to make copies properly. Confirm both latches are locked.

11

Image 11

Contents Electronic Board UB-5815Record these items for future reference AccessoriesThank you for purchasing the Panasonic Electronic Board Table of Contents Safety Information For Your SafetyHow to replace the fuse Precautions CD-ROM PrecautionsReplacing Part Names and Functions Panel Name Description Part Names and Functions Control panelInsert the blue shaft into the front left hole Installing the Thermal Transfer FilmSet the power switch to on Push down the printer open lever and open the printer doorInstalling the Thermal Transfer Film Pull the paper cover forward as shown in the left figure Loading Copy PaperClose the paper cover until a click is heard Loading Copy PaperPress the Copy Key Making CopiesMaking Copies Copy types and procedures Copy Type Procedure Replacing the Thermal Transfer Film Remove the jammed paper Paper JamsPaper Jams Install the thermal transfer filmClose the paper cover Turn the power onHang the screen in the desired slots of the slide plates Screen Height AdjustmentLoosen the height adjustment handles Tighten the height adjustment handles Screen Height AdjustmentSystem requirements Contents of CD-ROMConnecting the unit to a computer Computer InterfacingCheck button and click the Next button Installing the driver and softwareInstalling the USB and Printer driver Windows Computer InterfacingWindows Me Special Note for Windows 98/Me Although Digital Signature Not Power on your computer and start WindowsUB5 USB Printer A4/Letter* driver Windows XPClick on the desired language Installing Panasonic-DMS software and Twain driverClick the Install Panasonic-DMS Software button Acquire Image..., or click Removing the driver and softwareScanning Removing Panasonic-DMS software and Twain driverComputer Interfacing Panaboard Operation Panel Close Button PrintingStatus Box About ButtonCaring for the eraser Daily Care and MaintenanceCleaning the screen and the unit Cleaning the printer head, platen roller and pick-up rollerDaily Care and Maintenance Symptom Care and Remedy See TroubleshootingIndication Cause Remedy See Troubleshooting Meanings of error codesOption and Separately available SpecificationsModel No UB-5315 UB-5815