Panasonic UB-5315 installation manual Daily Care and Maintenance

Page 33

Daily Care and Maintenance

English

2

Cotton swab

Printer head

(Gold)

Clean the Printer Head

Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head.

Note

•Never touch the printer head or the surrounding area with your hands as this may disable copying.

3	Pick-up roller
3	Platen roller
4
	Latches

Clean the Platen Roller and the Pick-up Roller

Remove the thermal transfer film with both hands and carefully wipe any dirt or stains off the platen roller and pick-up roller.

•For details on removing the thermal transfer film, see page 16.

•Dampen a soft cloth with neutral kitchen cleaner diluted in water, wring the cloth thoroughly, and wipe the entire surface of the rollers while rotating them. If this does not remove all dirt, wipe with a cloth dampened with ethyl alcohol.

Install the thermal transfer film in its original position and close the printer door.

•For details on installing the thermal transfer film, see pages 10, 11.

•Close the printer door firmly until a click is heard.

Note

•If “ ” is displayed on the Multi-Copy/Error Indicator when the power is turned on, this indicates that the thermal transfer film has not been installed properly or that there is slack in the thermal transfer film. Check the condition of the thermal transfer film and for slack in the thermal transfer film.

33

Image 33

Contents Electronic Board UB-5815Accessories Thank you for purchasing the Panasonic Electronic BoardRecord these items for future reference Table of Contents For Your Safety How to replace the fuseSafety Information Precautions CD-ROM PrecautionsReplacing Part Names and Functions Panel Name Description Part Names and Functions Control panelSet the power switch to on Installing the Thermal Transfer FilmPush down the printer open lever and open the printer door Insert the blue shaft into the front left holeInstalling the Thermal Transfer Film Pull the paper cover forward as shown in the left figure Loading Copy PaperClose the paper cover until a click is heard Loading Copy PaperPress the Copy Key Making CopiesMaking Copies Copy types and procedures Copy Type Procedure Replacing the Thermal Transfer Film Remove the jammed paper Paper JamsPaper Jams Install the thermal transfer filmClose the paper cover Turn the power onScreen Height Adjustment Loosen the height adjustment handlesHang the screen in the desired slots of the slide plates Tighten the height adjustment handles Screen Height AdjustmentConnecting the unit to a computer Contents of CD-ROMComputer Interfacing System requirementsInstalling the USB and Printer driver Windows Installing the driver and softwareComputer Interfacing Check button and click the Next buttonWindows Me Special Note for Windows 98/Me Although Digital Signature Not Power on your computer and start WindowsUB5 USB Printer A4/Letter* driver Windows XPInstalling Panasonic-DMS software and Twain driver Click the Install Panasonic-DMS Software buttonClick on the desired language Scanning Removing the driver and softwareRemoving Panasonic-DMS software and Twain driver Acquire Image..., or clickComputer Interfacing Panaboard Operation Panel Status Box PrintingAbout Button Close ButtonCleaning the screen and the unit Daily Care and MaintenanceCleaning the printer head, platen roller and pick-up roller Caring for the eraserDaily Care and Maintenance Symptom Care and Remedy See TroubleshootingIndication Cause Remedy See Troubleshooting Meanings of error codesSpecifications Model No UB-5315 UB-5815Option and Separately available