Panasonic UB-5315 Screen Height Adjustment, Loosen the height adjustment handles

Page 20

Screen Height Adjustment

The screen can be adjusted at 3 levels except for the lowest level. The lowest level of the board attachment frame is designed for installation of the screen, so the printer cannot be attached at this level. Adjust the level of the screen unit as follows.

Please lock the casters when you adjust the screen height. (Refer to page 5.)

1

Height adjustment handles

Height adjustment handles

Loosen the height adjustment handles.

2	Board attachment
2	(lower)	Slide
		groove
		Down
		Lift
		Step frame
		Reinforce pipe
3

Slot 4

Slot 3

Slot 2

Slot 1

Hang the step frame on the reinforce pipe and lift the board attachment (lower) by stepping on the step frame.

Slide along the slide groove.

The screen height must be adjusted by two people.

Hang the screen in the desired slots of the slide plates.

Slot	Adjustment	Screen Height

Slot 1	Available	2000 mm

Slot 2	Available	1875 mm

Slot 3	Available	1750 mm

Slot 4	Cannot be used	–

Do not use slot 4.

Slot 4 cannot be used for screen height adjustment.

Confirm both sides of the screen are hung in the same height slots securely.

20

Image 20

Contents UB-5815 Electronic BoardRecord these items for future reference AccessoriesThank you for purchasing the Panasonic Electronic Board Table of Contents Safety Information For Your SafetyHow to replace the fuse Precautions Precautions CD-ROMReplacing Part Names and Functions Part Names and Functions Control panel Panel Name DescriptionInstalling the Thermal Transfer Film Set the power switch to onPush down the printer open lever and open the printer door Insert the blue shaft into the front left holeInstalling the Thermal Transfer Film Loading Copy Paper Pull the paper cover forward as shown in the left figureLoading Copy Paper Close the paper cover until a click is heardMaking Copies Press the Copy KeyMaking Copies Copy types and procedures Copy Type Procedure Replacing the Thermal Transfer Film Paper Jams Remove the jammed paperInstall the thermal transfer film Paper JamsTurn the power on Close the paper coverHang the screen in the desired slots of the slide plates Screen Height AdjustmentLoosen the height adjustment handles Screen Height Adjustment Tighten the height adjustment handlesContents of CD-ROM Connecting the unit to a computerComputer Interfacing System requirementsInstalling the driver and software Installing the USB and Printer driver WindowsComputer Interfacing Check button and click the Next buttonWindows Me Special Note for Windows 98/Me Power on your computer and start Windows Although Digital Signature NotWindows XP UB5 USB Printer A4/Letter* driverClick on the desired language Installing Panasonic-DMS software and Twain driverClick the Install Panasonic-DMS Software button Removing the driver and software ScanningRemoving Panasonic-DMS software and Twain driver Acquire Image..., or clickComputer Interfacing Panaboard Operation Panel Printing Status BoxAbout Button Close ButtonDaily Care and Maintenance Cleaning the screen and the unitCleaning the printer head, platen roller and pick-up roller Caring for the eraserDaily Care and Maintenance Troubleshooting Symptom Care and Remedy SeeTroubleshooting Meanings of error codes Indication Cause Remedy SeeOption and Separately available SpecificationsModel No UB-5315 UB-5815