Panasonic UB-5315 installation manual Computer Interfacing Panaboard Operation Panel

Page 30

Computer Interfacing

■Panaboard Operation Panel

It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons.

Note: While the Panaboard Operation Panel is displayed, the Copy Key and 2-Screen Copy Key on the electronic board control panel are used for scanning images into the computer.

Panel	Name		Description
		This lamp indicator notifies the user when the time to replace the
		thermal transfer film is approaching (estimated) and of the
		printing contrast used during scanning or copying.
		Indicator off:	Normal scanning or copying contrast
		Indicator on:	Darker than normal scanning or copying
	Contrast/		contrast
	Contrast/	Indicator flashing*: Almost time to replace the thermal transfer
	Remaining
	Remaining		film
	Film		film
	Film		(Note that only about 15 more sheets may be
	Indicator		(Note that only about 15 more sheets may be
	Indicator		copied when this indicator starts flashing.)
			copied when this indicator starts flashing.)
			Replacement film (UG-6001) is separately available
			from the dealer where you purchased your unit.

*The flashing indicator will go out after the power is turned off and the printer has been opened and closed. (When copying is performed, this indicator will begin flashing again.)

	Contrast	Each time this button is pressed, the unit will alternate between
	Button	normal and dark contrast modes (Normal/Dark).

	2-Screen	This button scans the front and back of the screen on a single
	Scan Button	page.

		This indicator displays the number of copies to be made. The
	Multi-Copy/	display changes each time the Multi-Copy/Stop Button is
	Multi-Copy/	pressed.
	Error	pressed.
	Error	Example: 1 → 2 → ··· → 9 → 1 → ···
	Indicator	Example: 1 → 2 → ··· → 9 → 1 → ···
	Indicator	When an error occurs, a flashing symbol will appear in this display to indicate

		the error status. (See page 35.)

		When making multiple copies, press this button until the desired
	Multi-Copy/	number of copies is displayed on the Multi-Copy/Error Indicator.
	Multi-Copy/	This button can also be pressed while multiple copies are being
	Stop Button
	Stop Button	made to stop the copying process.
		made to stop the copying process.
		* During scanning, the setting 1 to 9 for the number of copies is ignored.

	Scan Button	This button scans the screen.

	Advance	This button advances the screen from right to left.
	Button	This button advances the screen from right to left.
	Button

	2-Screen	This button causes the front and back of the screen to be copied
	Copy Button	on a single sheet of paper.

	Copy Button	This button causes the screen to be copied.

30

Image 30

Contents UB-5815 Electronic BoardAccessories Thank you for purchasing the Panasonic Electronic BoardRecord these items for future reference Table of Contents For Your Safety How to replace the fuseSafety Information Precautions Precautions CD-ROMReplacing Part Names and Functions Part Names and Functions Control panel Panel Name DescriptionPush down the printer open lever and open the printer door Installing the Thermal Transfer FilmSet the power switch to on Insert the blue shaft into the front left holeInstalling the Thermal Transfer Film Loading Copy Paper Pull the paper cover forward as shown in the left figureLoading Copy Paper Close the paper cover until a click is heardMaking Copies Press the Copy KeyMaking Copies Copy types and procedures Copy Type Procedure Replacing the Thermal Transfer Film Paper Jams Remove the jammed paperInstall the thermal transfer film Paper JamsTurn the power on Close the paper coverScreen Height Adjustment Loosen the height adjustment handlesHang the screen in the desired slots of the slide plates Screen Height Adjustment Tighten the height adjustment handlesComputer Interfacing Contents of CD-ROMConnecting the unit to a computer System requirementsComputer Interfacing Installing the driver and softwareInstalling the USB and Printer driver Windows Check button and click the Next buttonWindows Me Special Note for Windows 98/Me Power on your computer and start Windows Although Digital Signature NotWindows XP UB5 USB Printer A4/Letter* driverInstalling Panasonic-DMS software and Twain driver Click the Install Panasonic-DMS Software buttonClick on the desired language Removing Panasonic-DMS software and Twain driver Removing the driver and softwareScanning Acquire Image..., or clickComputer Interfacing Panaboard Operation Panel About Button PrintingStatus Box Close ButtonCleaning the printer head, platen roller and pick-up roller Daily Care and MaintenanceCleaning the screen and the unit Caring for the eraserDaily Care and Maintenance Troubleshooting Symptom Care and Remedy SeeTroubleshooting Meanings of error codes Indication Cause Remedy SeeSpecifications Model No UB-5315 UB-5815Option and Separately available