Windows Me

Computer Interfacing

1 Power on your computer and start Windows.

2 Power on the electronic board, and connect the unit and your computer with a USB cable.

3 When “Panaboard-UB5 USB Device” is detected, click on the “Specify the location of the driver (Advanced)” check button and click the [Next] button.

4 Insert the CD-ROM into the CD-ROM drive. When the Setup window appears, click the (close button) to close it.

5 Select the “Specify a location:” only, then specify “D (CD-ROM drive letter): \UB-5xxx\UsbDrv\Win98-Me” in the text box, and click the [Next] button.

•Do not select the CD-ROM drive. It may cause installing a wrong USB driver.

6 When the driver is found, click the [Next] button.

7 When the installation of “Panaboard-

UB5 USB Device Driver” is completed, click the [Finish] button.

8 When “Panaboard-UB5 USB Printer” is detected, click on the “Specify the location of the driver (Advanced)” check button and click the [Next] button.

9 Confirm that the “Specify a location:”

is the same as step 5, click the [Next] button.

10 When the driver is found, click the [Next] button.

11 When the installation of “USB Printing Support” is completed, click the [Finish] button.

12 When “PanasonicPanaboard-UB5 USB Printer (A4/Letter)*” is detected, click on the “Specify the location of the driver (Advanced)” check button and click the [Next] button.

13 Confirm that the “Specify a location:” is the same as step 5, click the [Next] button.

14 When the driver is found, click the [Next] button.

15 Follow the on-screen instructions when the “Add Printer Wizard” executes.

16 When the installation of “Panaboard- UB5 USB Printer (A4/Letter)*” driver

is completed, click the [Finish] button.

* A4 or Letter changes with the models.

•A floppy disk or CD-ROM for installing the operating system will also be necessary. (See page 25.)