Panasonic UB-5315 installation manual Daily Care and Maintenance, Cleaning the screen and the unit

Page 32

Daily Care and Maintenance

Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit.

■Cleaning the screen and the unit

Gently wipe the screen film and unit with a water- dampened cloth that has been thoroughly wrung.

•Use a kitchen cleaner diluted with water for hard-to- clean stains.

•If you accidentally write on the board with an oil-based

marker, wipe with a small amount of ethyl alcohol.

Notes

•Do not use thinner, benzine or cleaners containing abrasives as this may result in discoloration.

•Do not wipe the screen film with a dry cloth as this may generate a static charge.

■Caring for the eraser

When the erasing surface of the eraser becomes dirty, hold down the sheet under the top sheet with your finger and peel off the dirty sheet by pulling in the direction of the arrow.

Note

•When the eraser becomes thin, make sure that the corners of the eraser do not strike the screen during erasing as this may damage the screen.

■Cleaning the printer head, platen roller and pick-up roller

If black streaks appear on the copy, clean the printer head and the platen roller.

If paper jams occur frequently, clean the pick-up roller.

1

Printer door

Push down the printer open lever and open the printer door.

32

Image 32

Contents UB-5815 Electronic BoardRecord these items for future reference AccessoriesThank you for purchasing the Panasonic Electronic Board Table of Contents Safety Information For Your SafetyHow to replace the fuse Precautions Precautions CD-ROMReplacing Part Names and Functions Part Names and Functions Control panel Panel Name DescriptionInstalling the Thermal Transfer Film Set the power switch to onPush down the printer open lever and open the printer door Insert the blue shaft into the front left holeInstalling the Thermal Transfer Film Loading Copy Paper Pull the paper cover forward as shown in the left figureLoading Copy Paper Close the paper cover until a click is heardMaking Copies Press the Copy KeyMaking Copies Copy types and procedures Copy Type Procedure Replacing the Thermal Transfer Film Paper Jams Remove the jammed paperInstall the thermal transfer film Paper JamsTurn the power on Close the paper coverHang the screen in the desired slots of the slide plates Screen Height AdjustmentLoosen the height adjustment handles Screen Height Adjustment Tighten the height adjustment handlesContents of CD-ROM Connecting the unit to a computerComputer Interfacing System requirementsInstalling the driver and software Installing the USB and Printer driver WindowsComputer Interfacing Check button and click the Next buttonWindows Me Special Note for Windows 98/Me Power on your computer and start Windows Although Digital Signature NotWindows XP UB5 USB Printer A4/Letter* driverClick on the desired language Installing Panasonic-DMS software and Twain driverClick the Install Panasonic-DMS Software button Removing the driver and software ScanningRemoving Panasonic-DMS software and Twain driver Acquire Image..., or clickComputer Interfacing Panaboard Operation Panel Printing Status BoxAbout Button Close ButtonDaily Care and Maintenance Cleaning the screen and the unitCleaning the printer head, platen roller and pick-up roller Caring for the eraserDaily Care and Maintenance Troubleshooting Symptom Care and Remedy SeeTroubleshooting Meanings of error codes Indication Cause Remedy SeeOption and Separately available SpecificationsModel No UB-5315 UB-5815