Panasonic CF-35 operating instructions Using PC Cards, Installing/Removing the PC Card, Type I or

Page 23

Using PC Cards

PC Card Slots

Your computer has two PC Card slots. These slots conform to the PC Card Standard; there- fore, communications and SCSI devices may be utilized. The slot allows you to use two Type I or Type II cards (or one Type I and one Type II), or one Type III card.

Type I or II

Type III

Two cards can be used simultaneously.

One card can be used only in the bottom slot.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bottom Slot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

Please check the PC Cards’ specifications. Be sure the total operating current does not exceed the specified limit. Damage may result otherwise.

Allowable Current (total for two slots) : 3.3 V: 400 mA, 5 V: 400 mA, 12 V: 120 mA There are times when both a Type I card and a Type II card will not work at the same time. SRAM and FLASH ROM (except for ATA interface) cards are not supported.

When using a CardBus type card, use only that card; do not insert any other PC Cards.

Only the bottom slot can support a Zoomed Video (ZV) card.

Button

1

2

Installing/Removing the PC Card

1 Power off your computer ( page 10)

Do not shut down using the suspend or hibernation mode.

CAUTION

Do not install or remove peripherals while your computer is in the suspend or hibernation mode; abnormal operation may result.

Before removing a PC Card, go to [Socket Status] (in [Start] - [Settings] - [Control Panel] - [PC Card (PCMCIA)]), select the PC Card slot and press [Stop].

2 Removing the PC Card (or the dummy card)

Pull the button out and then press it.

NOTE

Dummy cards are provided at the time of purchase. They provide protection for the PC Card slots against such things as dust.

Installing the PC Card

Simply slide the PC Card in until it snaps into place.

Please refer to the manual for each card on how to install the card (insertion is typically label-side up).

Label-side up

3 Turn your computer on

There are some PC Cards that require special or updated device driver be installed. Follow the instructions on the screen and read any related manuals on how to install these device drivers.

NOTE

You may need to install a driver from the Windows 95 CD-ROM (included) or a PC Card's floppy disk. Simply follow the on-screen instructions and read the PC Card's operation manual on how to install the driver.

PhoenixCard Manager95:

Follow the installation procedure below only if you will be using the ZV card. Otherwise, do not perform the installa- tion; abnormal operation may result.

1Set [Sound Chip] to [Automatic (PnP)] in the Setup Utility.

2Select [Start] - [Run] and type [c:\util\phoenix\disk1\setup.exe] press , and then follow the on-screen in- structions.

If PhoenixCard Manager95 has been reinstalled, follow the instructions in “Installing PhoenixCard Manager95" on page 34.

After PhoenixCard Manager95 has been installed, make sure to power off the computer before installing or removing the card. Also, do not use the suspend or hibernation functions if the card is installed.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Operating Instructions Copyright Customers RecordIntroduction Illustrations in this ManualFor U.K Lithium BatteryHow to replace the fuse For U.S.AFor France PrecautionsFor Germany Computer Viruses Read Me FirstSaving Data on the Hard Disk Saving Data on Floppy DisksWindows 95 System Pack First-time OperationConfirm the inclusion of all parts Dummy FDD Operating InstructionsClamps Connect your computer to a power outletRead the Limited USE Licence Agreement Handling the AC adapterFirst-time Operation Starting Up Starting Up/Shutting DownStarting Up Your Computer Quickly Using the Touch PadShutting Down power off your computer Starting Up/Shutting DownResuming Operation Using the suspend functionUsing the hibernation function Shutting DownThings to Remember Conserving PowerSetting the hibernation timeout Computing On the RoadPower Management settings Setting Power ManagementComputing On the Road Battery StatusUse the Battery Indicator to Check on the Battery Status When the Remaining Battery Charge Becomes LowUsing the Battery Pack Replacing the Battery Pack Using the Battery PackRe-enter your password at the Enter User Password Again When the User Password is setRun the Setup Utility To disable your passwordSecurity Measures Setting the Coffee break Password enabling or disablingWhen the coffee break password is set To disable the Coffee break PasswordMay be Opened ProcedureWhen the supervisor password is set Preventing the use of a floppy diskEnabling, changing, disabling Setting the Supervisor PasswordTo disable your supervisor password Running TranXitTM Infrared Data CommunicationsPreparations for Infrared Data Communications Add-ons/Peripherals Using a CD-ROM DriveInstalling/Removing the Unit Installing the unitType I or Using PC CardsInstalling/Removing the PC Card Installing the PC CardAdding Memory Installing/Removing the RAM ModuleInstalling the RAM module Add-ons/PeripheralsUsing a Printer Connecting a Port ReplicatorUsing an External Display Installing/Removing the hard disk Usage Environment Usage, Carrying and MaintenanceWhen flying MaintenanceComputer Diagnosis List of Error CodesUsing the Self-diagnosis Program At the MS-DOS prompt A\WINDOWS\COMMAND, input the followingStarting Up Dealing with ProblemsBattery Indicator Character Input Dealing with ProblemsDisplay Disk OperationsConnecting Peripherals Setup UtilityPreparation Reinstalling SoftwareBefore Reinstallation ReinstallingVideo driver System setupPower Management Device ManagerInstalling Internet Explorer Reinstalling SoftwareInstalling TranXit Installing PhoenixCard Manager95If not, press Windows 95 Setup ProcedureIf you want to complete the printer settings, press Enter your name and your company’s name, then pressKey Operations Setup UtilityRunning the Setup Utility Closing the ProgramUser Password Other Specifications SpecificationsMain Specifications Names and Functions of Parts Limited USE License Agreement Laufzeit der Lizenz LizenzTermes, clauses et conditions Contrat de licence dusage limitéLicence Index LED indicatorsDFQX2535YA
Top Page Image Contents