Security Measures
Setting the Supervisor Password
(enabling, changing, disabling)
1 Run the Setup Utility (
page 36)
2 Using 
and 
, select [Supervisor Setup] then press 
3 Using 
and 
, select [Supervisor Password] then press
4
To enable or change your supervisor password
Enter your password at the [Enter Supervisor Password], then press 
.
CAUTION
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no dis- tinction between upper and lower case letters.
White colored keys can be used. Note that space bar and function keys cannot be used.
Do not input your password while holding down on the 
or 
. Use only the upper horizontal row of numeric keys to input user pass- words. The numeric keys combined with alphabet keys on the lower key- board cannot be used.
Do not forget your password. If a password is forgotten you will be un- able to use your computer.
To disable your supervisor password
Using 
and 
, select [Delete Supervisor Password] then press 
. Go to step 7.
5
(This is for confirmation purposes.)
NOTE
When you do not want the User Password enabled, changed, or disabled without permission,
use 
and 
to select [User Password Protection], then set [Enable] with
.
6
7
Using 
and 
, select [Set Supervisor Password] then press
At the confirmation screen, press 
8 Press 
to end the password setting procedure
9 Close the Setup Utility ( 
page 36)
20