Panasonic CF-35 Dealing with Problems, Display, Disk Operations, Character Input

Page 30

Dealing with Problems

Display

No display after powering	The brightness can be adjusted with	+	. Dark	Bright
on;

For models with an DSTN display, you can adjust the contrast with + . When purchasing the computer, the display setting has been preset for an external display. If you connect the external display, the screen is displayed on the external display.

When there is no display to an external display,

	• Check your cable connection for an external display.
	• Confirm your display is on.
	If your computer is connected to an external display and the internal LCD has been set to
	"off", and the computer is placed in the hibernation or suspend mode, the internal LCD
	will remain in the "off" mode if the external display is not connected when the computer
	is restarted. In this case, re-connect the external display and reboot the computer.

The power has not been cut,	Has the computer been set to the power-saving mode?
but after a certain period of	To resume operation of your computer, press any key.
time, there is no display	To save power, your computer may have automatically entered the hibernation mode.

An afterimage appears	If an image is displayed for a prolonged period of time, an afterimage may appear. This is
	not a malfunction. The afterimage will disappear when a different screen is displayed.

The motion of a mouse	[Start]-[Settings]-[Control Panel]-[Mouse]-[Motion] and check [Show pointer trails].
cursor is not smooth

Disk Operations

Cannot read/write to a	Has the floppy disk been correctly inserted?
floppy disk	Has the floppy disk been correctly formatted?
	Your floppy disk drive may not have been properly set in the multimedia pocket.
	Has the Setup Utility been used to set [Floppy Operation] to [Enable]?

Unable to write to a floppy	Is the floppy disk write-protected?
disk

How to format a floppy disk	Select [Format] in [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming the disk
is unclear	volume and format type, click	.

Unable to read/write to the	Your drive or file may not have been properly set.
hard disk	Check to see if the hard disk is full.
	Your hard disk content may be corrupted. Consult your nearest Panasonic dealer.

Character Input

Unable to input anything	If	and			are on, the Numeric Key Pad is ON. To switch it OFF, press			+	.
Unable to input anything	If	and			are on, the Numeric Key Pad is ON. To switch it OFF, press			+	.
but numerals

Only capital letters are	If	is on, the Caps Lock is ON. To switch it OFF, press				.
being input

How to input European	Select [Start] - [Run], input [c:\windows\charmap.exe] and press						. The Character
characters (ß, à, ç) or	Map will be displayed. Point to the desired font name and select it.
symbols is unclear

30

Image 30

Contents Operating Instructions Illustrations in this Manual Customers RecordIntroduction CopyrightFor U.S.A Lithium BatteryHow to replace the fuse For U.KPrecautions For GermanyFor France Saving Data on Floppy Disks Read Me FirstSaving Data on the Hard Disk Computer VirusesDummy FDD Operating Instructions First-time OperationConfirm the inclusion of all parts Windows 95 System PackHandling the AC adapter Connect your computer to a power outletRead the Limited USE Licence Agreement ClampsFirst-time Operation Starting Up/Shutting Down Starting UpStarting Up/Shutting Down Using the Touch PadShutting Down power off your computer Starting Up Your Computer QuicklyShutting Down Using the suspend functionUsing the hibernation function Resuming OperationComputing On the Road Conserving PowerSetting the hibernation timeout Things to RememberSetting Power Management Power Management settingsWhen the Remaining Battery Charge Becomes Low Battery StatusUse the Battery Indicator to Check on the Battery Status Computing On the RoadUsing the Battery Pack Using the Battery Pack Replacing the Battery PackTo disable your password When the User Password is setRun the Setup Utility Re-enter your password at the Enter User Password AgainTo disable the Coffee break Password Setting the Coffee break Password enabling or disablingWhen the coffee break password is set Security MeasuresPreventing the use of a floppy disk ProcedureWhen the supervisor password is set May be OpenedSetting the Supervisor Password To disable your supervisor passwordEnabling, changing, disabling Infrared Data Communications Preparations for Infrared Data CommunicationsRunning TranXitTM Installing the unit Using a CD-ROM DriveInstalling/Removing the Unit Add-ons/PeripheralsInstalling the PC Card Using PC CardsInstalling/Removing the PC Card Type I orAdd-ons/Peripherals Installing/Removing the RAM ModuleInstalling the RAM module Adding MemoryConnecting a Port Replicator Using an External DisplayUsing a Printer Installing/Removing the hard disk Maintenance Usage, Carrying and MaintenanceWhen flying Usage EnvironmentAt the MS-DOS prompt A\WINDOWS\COMMAND, input the following List of Error CodesUsing the Self-diagnosis Program Computer DiagnosisDealing with Problems Battery IndicatorStarting Up Disk Operations Dealing with ProblemsDisplay Character InputSetup Utility Connecting PeripheralsReinstalling Reinstalling SoftwareBefore Reinstallation PreparationDevice Manager System setupPower Management Video driverInstalling PhoenixCard Manager95 Reinstalling SoftwareInstalling TranXit Installing Internet ExplorerEnter your name and your company’s name, then press Windows 95 Setup ProcedureIf you want to complete the printer settings, press If not, pressClosing the Program Setup UtilityRunning the Setup Utility Key OperationsUser Password Specifications Main SpecificationsOther Specifications Names and Functions of Parts Limited USE License Agreement Lizenz Laufzeit der LizenzContrat de licence dusage limité LicenceTermes, clauses et conditions LED indicators IndexDFQX2535YA