Panasonic PT-DW6300U, PT-D5000U manual  Side views, About Your Projector

Page 13

Side views

S-VIDEO IN

Connect an S-VIDEO signals. (Mini DIN 4 pin)

VIDEO IN

Connect a video signals. (BNC)

LAN

Connect a LAN cable for network connection.

(RJ-45)

About Your Projector

RGB 1 IN

Connect an RGB or YPBPR signals. (3, 4 or 5 wire BNC)

RGB 2 IN

Connect an RGB or YPBPR signals. (D-SUB 15 pin female)

DVI-D IN

Preparation

Connect a single link DVI-D signals.

(DVI-D 24 pin)

 

REMOTE 1 IN/OUT When two or more main units are used in the system, they can be connected and controlled with wired remote control cable.

(M3 jack)

REMOTE 2

Connect a cable from an external control circuit. (D-sub 9 pin female)

SERIAL IN/SERIAL OUT Connect an RS-232C cable from/to a computer.

SDI IN (PT-DZ6710U only) Connect a cable from a computer.

(BNC)

Air intake port

POWER button

Switch the projector on/off. (page 19)

Air intake port

AC IN terminal

Connect the power cord to supply electronic power to the projector. (page 19)

Security lock

Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kensington MicroSaver Security System.

Auto Cleaning Filter (ACF) compartment (page 32)

NOTE:

Switch on the POWER button of the projector body that is located near the terminals before using the control buttons.

Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to do so may cause malfunctions. Do not touch the metallic parts of LAN terminal and cable.

Please connect the LAN to indoor devices only.

ENGLISH - 13

Image 13
Contents PT-DZ6700U PT-DW6300U PT-D6000U PT-D5000U Dear Panasonic Customer Important Safety NoticeDeclaration of Conformity Important Safety NoticePT-DZ6710U /PT-DZ6700U /PT-DW6300U /PT-D6000U /PT-D5000U PanasonicEnvironment care information for users in China Contents Precautions with regard to safety Precautions with regard to safety Remove the used batteries from the remote control promptly Do not set up the projector outdoorsDo not put your weight on this projector Do not use chemical treated wipes when cleaningDo not reach for the openings beside the optical Replacement of the lamp unit should only be carriedBe sure to always remove the lens during transport Order to get the best picture qualitySecurity OthersRemote control x1 N2QAYB000371 AccessoriesProjector lens cover x1 TKKL5244-1 Power cord secure lock Safety cable Power cord WashersProjector body About Your Projector Top, front and bottom view About Your Projector  Side viewsRemote control Number, and the remote control 2 digits ID number must When multiple projectors are connected as partBe set to match the intended projector. The default IN/OUT terminal. It is effective to use the wired remote Cautions when setting the projectors Setting upProjection method Over 10 cmRemoving and attaching the projection lens Setting up Removing the projection lens from the projector  Attaching the projection lens to the projector Connecting Power cord Adjusting focus, zoom and shift  Switching on the projectorPower switch AC in terminal Projecting Direct power off function Projecting  Switching off the projector Adjustment range after lens Position optical shift PT-D5000USetting up the image position automatically Remote control operationOperating range  Facing to the projectorStopping the projection Switching the input signalClearing the on-screen menu Changing the picture aspect ratioResetting to the factory default Using an assigned functionDisplaying the status of the projector Main menu and Sub-menu Menu NavigationRS-232C Display OptionSecurity Menu Navigation Operating procedure  Adjusting with the bar scale itemsNavigating through the menu  Displaying the Main menuManaging the indicated problems Monitor Lamp indicators LAMP1/LAMP2 indicator  Temp indicatorStatus in Projector Setup menu Monitor Lamp indicators  Filter indicatorStatus in Projector  When to replace the lamp unit ReplacementReplacing the Lamp unit  Before replacing the Lamp unitLamp unit cover fixing screw  Removing and replacing the lamp unitLamp u nit fixing screws HandleReplacing the Auto Cleaning Filter ACF Troubleshooting Technical Information List of compatible signals Display dots of each model Projecting an interlaced signal may cause flicker in screenPT-DZ6710U PT-DZ6700UTechnical Information SpecificationsSerial  Attachment procedure Ceiling mount bracket safeguardsCeiling mount Trademark acknowledgements DimensionsUnit mm inch Index Index Cher client Panasonic Avis important concernant la sécuritéDéclaration de conformité Avis important concernant la sécuritéPrécautions de sécurité Précautions de sécurité Précautions lors du transport Précautions lors de lutilisation Précautions lors de linstallationAutres Instructions de sécurité Sécurité Délai de remplacement de lunité de la lampe Remplacement Avant de remplacer le lUnité de la lampe  Retirer et remplacer la lampe Remplacement  Procédure de remplacementVis de la lampe Connecteur dalimentation électrique du ventilateur Procédure de fixation RemplacementMontage au plafond

PT-D5000U, PT-DW6300U specifications

The Panasonic PT-DW6300U and PT-D5000U are two powerful projectors designed for large venues, offering advanced features and cutting-edge technology that cater to a variety of professional settings, including corporate environments, educational institutions, and staging events.

The PT-DW6300U is a high-quality 3-chip DLP projector with a brightness level of 6,300 lumens and a resolution of WUXGA (1920x1200). One of its standout features is the Dynamic Iris technology, which enhances contrast and delivers vibrant, sharp images even in brightly lit rooms. The projector is equipped with a dual lamp system, ensuring reliability and extended operational life, which is crucial for continuous use in demanding environments. Additionally, the PT-DW6300U supports a variety of sources, including HDMI, DVI-D, and component inputs, making it versatile for multi-source presentations.

On the other hand, the PT-D5000U is a formidable option with a brightness of 5,000 lumens and a native resolution of XGA (1024x768). This model also employs 3-chip DLP technology, ensuring excellent color fidelity and image stability. A key highlight of the PT-D5000U is its advanced cooling system, which helps maintain optimal operating temperatures, thereby enhancing the projector's longevity. It also features a lens shift capability that allows greater flexibility in installation, enabling users to project images at various angles without compromising quality.

Both projectors utilize Panasonic's proprietary Eco Filter technology, which provides long-term filtration without needing frequent replacements, thus reducing maintenance costs. The automation features of these projectors further enhance usability; both models can be easily integrated into existing AV systems and support network monitoring for remote management.

In summary, the Panasonic PT-DW6300U and PT-D5000U projectors offer impressive brightness, reliability, and advanced features that make them ideal for professional environments. Their combination of high-resolution output, versatile connectivity options, and intelligent cooling systems positions them at the forefront of modern projection technology, catering to the demanding needs of today’s presentations and events. With these models, Panasonic continues to deliver exceptional visual experiences tailored for large audiences, ensuring every detail is clearly visible and impactful.