Technical Information
Ceiling mount bracket safeguards
The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security.
Installation work of the ceiling mount bracket should only be carried by a qualified technician according to the following procedure.
Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions.
Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
An unused ceiling mount bracket should be removed promptly by qualified technician.
Do not use other than the provided safety cable (x1) and washers (x2).
Do not use the screw holes of the front leg adjusters for the projector installation.
Do not attach the safety cable to the burglar hook port and suspend the projector on it.
Read the installation instructions booklet that is provided with the ceiling mount bracket to install the safety cable.
Attachment procedure
1. | Turn the projector upside down and place it gently on a | Front leg adjuster |
| soft cloth. | |
|
| |
2. | Turn one of the front leg adjuster counterclockwise to |
|
| remove from the projector. |
|
Appendix
3.Insert the front leg adjuster through the ring of the washer.
4.Place the front leg adjuster through the loop of the safety cable.
5.Attach the front leg adjuster to the projector by turning clockwise, and then tighten up the front leg adjuster securely.
6. Pull the safety cable outward toward the ceiling.
Ceiling mount
Please also attach the washer which is additional accessory to the ceiling mount.
Washer
Front leg adjuster Washer 
Safety cable