Panasonic PT-DW6300U Monitor Lamp indicators  Filter indicator, Status in Projector Setup menu

Page 29

Monitor Lamp indicators

FILTER indicator

The FILTER indicates the Auto Cleaning Filter (ACF) unit status.

Lamp

Information

 

Check point

 

Remedial measure

indication

 

 

 

 

 

 

 

 

 

Check the REMAINING FILTER

Replace the ACF unit.

Lighting in red

The ACF unit has run out.

 

of STATUS in PROJECTOR

 

 

 

 

 

SETUP menu.

 

 

Blinking in red

The ACF unit is not

Check the ACF unit

Replace the ACF unit.

installed.*1

 

compartment.

 

 

 

 

 

 

 

The ACF unit remains

Check the REMAINING FILTER

Request the dealer to purchase the new

Lighting in

few. The remaining use

 

of STATUS in PROJECTOR

 

ACF unit.

time of the ACF unit is

 

SETUP menu.

 

 

orange

 

 

 

approximately

 

 

 

 

 

 

 

 

 

 

200 hours.*2

 

 

 

 

 

 

Is foreign object blocking the

Remove the foreign object from the ACF

Blinking in

The ACF unit cannot

 

ACF unit operation?

 

unit.

orange

operate properly.

 

 

• When the foreign object still remained,

 

 

 

 

 

contact the dealer.

*1. When the ACF unit is not installed, the filter indicator will blink in red and the power will turn off.

*2. 200 hours is the roughly guided time.

NOTE:

When the FILTER indicator is flashing green, the Auto Cleaning Filter (ACF) is normally rolling up.

When the ACF unit is operating, operational sound may be heard.

In a dusty environment, the guided remaining use time will be shorter. Contact the dealer to purchase the new ACF unit earlier.

If using the projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level and HIGH ALTITUDE MODE in PROJECTOR SETUP menu is OFF, it may cause malfunction of the ACF unit.

Before the FILTER indicator blinks in orange when operational malfunction, mechanical sound of the clutch may be heard.

Maintenance

ENGLISH - 29

Image 29
Contents PT-DZ6700U PT-DW6300U PT-D6000U PT-D5000U Dear Panasonic Customer Important Safety NoticeDeclaration of Conformity Important Safety NoticePT-DZ6710U /PT-DZ6700U /PT-DW6300U /PT-D6000U /PT-D5000U PanasonicEnvironment care information for users in China Contents Precautions with regard to safety Precautions with regard to safety Remove the used batteries from the remote control promptly Do not set up the projector outdoorsDo not put your weight on this projector Do not use chemical treated wipes when cleaningDo not reach for the openings beside the optical Replacement of the lamp unit should only be carriedBe sure to always remove the lens during transport Order to get the best picture qualitySecurity OthersRemote control x1 N2QAYB000371 AccessoriesProjector lens cover x1 TKKL5244-1 Power cord secure lock Safety cable Power cord Washers Top, front and bottom view About Your ProjectorProjector body About Your Projector  Side viewsRemote control Number, and the remote control 2 digits ID number must When multiple projectors are connected as partBe set to match the intended projector. The default IN/OUT terminal. It is effective to use the wired remote Cautions when setting the projectors Setting upProjection method Over 10 cmRemoving and attaching the projection lens Setting up Removing the projection lens from the projector  Attaching the projection lens to the projector Connecting Power cord Adjusting focus, zoom and shift  Switching on the projectorPower switch AC in terminal Projecting Direct power off function Projecting  Switching off the projector Adjustment range after lens Position optical shift PT-D5000USetting up the image position automatically Remote control operationOperating range  Facing to the projectorStopping the projection Switching the input signalClearing the on-screen menu Changing the picture aspect ratioDisplaying the status of the projector Using an assigned functionResetting to the factory default Main menu and Sub-menu Menu NavigationRS-232C Display OptionSecurity Menu Navigation Operating procedure  Adjusting with the bar scale itemsNavigating through the menu  Displaying the Main menuManaging the indicated problems Monitor Lamp indicators LAMP1/LAMP2 indicator  Temp indicatorStatus in Projector Monitor Lamp indicators  Filter indicatorStatus in Projector Setup menu  When to replace the lamp unit ReplacementReplacing the Lamp unit  Before replacing the Lamp unitLamp unit cover fixing screw  Removing and replacing the lamp unitLamp u nit fixing screws HandleReplacing the Auto Cleaning Filter ACF Troubleshooting Technical Information List of compatible signals Display dots of each model Projecting an interlaced signal may cause flicker in screenPT-DZ6710U PT-DZ6700UTechnical Information SpecificationsSerial Ceiling mount Ceiling mount bracket safeguards Attachment procedure Unit mm inch DimensionsTrademark acknowledgements Index Index Cher client Panasonic Avis important concernant la sécuritéDéclaration de conformité Avis important concernant la sécuritéPrécautions de sécurité Précautions de sécurité Précautions lors du transport Autres Précautions lors de linstallationPrécautions lors de lutilisation Instructions de sécurité Sécurité Avant de remplacer le lUnité de la lampe Remplacement Délai de remplacement de lunité de la lampe  Retirer et remplacer la lampe Remplacement  Procédure de remplacementVis de la lampe Connecteur dalimentation électrique du ventilateurMontage au plafond Remplacement Procédure de fixation

PT-D5000U, PT-DW6300U specifications

The Panasonic PT-DW6300U and PT-D5000U are two powerful projectors designed for large venues, offering advanced features and cutting-edge technology that cater to a variety of professional settings, including corporate environments, educational institutions, and staging events.

The PT-DW6300U is a high-quality 3-chip DLP projector with a brightness level of 6,300 lumens and a resolution of WUXGA (1920x1200). One of its standout features is the Dynamic Iris technology, which enhances contrast and delivers vibrant, sharp images even in brightly lit rooms. The projector is equipped with a dual lamp system, ensuring reliability and extended operational life, which is crucial for continuous use in demanding environments. Additionally, the PT-DW6300U supports a variety of sources, including HDMI, DVI-D, and component inputs, making it versatile for multi-source presentations.

On the other hand, the PT-D5000U is a formidable option with a brightness of 5,000 lumens and a native resolution of XGA (1024x768). This model also employs 3-chip DLP technology, ensuring excellent color fidelity and image stability. A key highlight of the PT-D5000U is its advanced cooling system, which helps maintain optimal operating temperatures, thereby enhancing the projector's longevity. It also features a lens shift capability that allows greater flexibility in installation, enabling users to project images at various angles without compromising quality.

Both projectors utilize Panasonic's proprietary Eco Filter technology, which provides long-term filtration without needing frequent replacements, thus reducing maintenance costs. The automation features of these projectors further enhance usability; both models can be easily integrated into existing AV systems and support network monitoring for remote management.

In summary, the Panasonic PT-DW6300U and PT-D5000U projectors offer impressive brightness, reliability, and advanced features that make them ideal for professional environments. Their combination of high-resolution output, versatile connectivity options, and intelligent cooling systems positions them at the forefront of modern projection technology, catering to the demanding needs of today’s presentations and events. With these models, Panasonic continues to deliver exceptional visual experiences tailored for large audiences, ensuring every detail is clearly visible and impactful.