Panasonic PT-D5000U manual Replacement, Replacing the Lamp unit,  Before replacing the Lamp unit

Page 30

Replacement

Replacing the Lamp unit

Before replacing the Lamp unit

Turn off the POWER switch of the projector in proper way and disconnect the power plug from the wall outlet.

Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough.

Prepare a Phillips-head screwdriver.

Contact the dealer to purchase a replacement lamp unit (ET-LAD60:1 bulb unit, ET-LAD60W: 2 bulb units).

When the projector is mounted on the ceiling, do not work directly under the projector or put your face closer to the projector.

CAUTION:

• The lamp may explode by shocks or chipping damage.

NOTE:

Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.

Do not attempt replacement with an unauthorized lamp unit.

Both lamps must be set in a lamp unit. If only one lamp is set, the power will not work.

When to replace the lamp unit

The lamp unit is consumable and the brightness decreases by duration of usage. The LAMP1/LAMP2

indicators will inform you of the replacement timing at 1 800*2 hours, and at 2 000*1 hours, the projector will be turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics of the lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP1/ LAMP2 of STATUS in the PROJECTOR SETUP menu.

On screen

LAMP indicator

Indication

REPLACE LAMP

LAMP

Maintenance

Over 1 800*2 hours

REPLACE LAMP” is displayed on the upper left

 

of the screen for 30 seconds. Press any button to

 

 

clear the screen, or disappears after 30 seconds.

Lights in red

Over 2 000*1 hours

REPLACE LAMP” is displayed on the upper left

of the screen, and it will stay until you respond.

 

 

To clear the screen, press any button.

 

CAUTION:

If you keep using the lamp unit after 2 000*1 hours, it cause the damage of the projector. Automatically the projector will be powered off after 10 minutes.

NOTE:

The guide times, 1 800*2 and 2 000*1 hours, are rough estimates based on certain conditions and are not a guaranteed time.

For more information about the lamp unit, see the instructions which is provided with the lamp unit.

*1. 3 000 hours for PT-D5000U.

*2. 2 800 hours for PT-D5000U.

ENGLISH - 30

Image 30
Contents PT-DZ6700U PT-DW6300U PT-D6000U PT-D5000U Important Safety Notice Dear Panasonic CustomerPT-DZ6710U /PT-DZ6700U /PT-DW6300U /PT-D6000U /PT-D5000U Important Safety NoticeDeclaration of Conformity PanasonicEnvironment care information for users in China Contents Precautions with regard to safety Precautions with regard to safety Do not put your weight on this projector Do not set up the projector outdoorsRemove the used batteries from the remote control promptly Do not use chemical treated wipes when cleaningBe sure to always remove the lens during transport Replacement of the lamp unit should only be carriedDo not reach for the openings beside the optical Order to get the best picture qualityOthers SecurityProjector lens cover x1 TKKL5244-1 Power cord secure lock AccessoriesRemote control x1 N2QAYB000371 Safety cable Power cord WashersAbout Your Projector Projector body Top, front and bottom view  Side views About Your ProjectorRemote control Be set to match the intended projector. The default When multiple projectors are connected as partNumber, and the remote control 2 digits ID number must IN/OUT terminal. It is effective to use the wired remoteProjection method Setting up Cautions when setting the projectors Over 10 cm Removing the projection lens from the projector Setting upRemoving and attaching the projection lens  Attaching the projection lens to the projectorPower cord  ConnectingPower switch AC in terminal  Switching on the projector Adjusting focus, zoom and shift Projecting Adjustment range after lens Position optical shift Projecting  Switching off the projector Direct power off function PT-D5000UOperating range Remote control operationSetting up the image position automatically  Facing to the projectorClearing the on-screen menu Switching the input signalStopping the projection Changing the picture aspect ratioUsing an assigned function Resetting to the factory defaultDisplaying the status of the projector Menu Navigation Main menu and Sub-menuDisplay Option RS-232CMenu Navigation SecurityNavigating through the menu  Adjusting with the bar scale items Operating procedure  Displaying the Main menu LAMP1/LAMP2 indicator Monitor Lamp indicatorsManaging the indicated problems  Temp indicatorMonitor Lamp indicators  Filter indicator Status in Projector Setup menuStatus in Projector Replacing the Lamp unit Replacement When to replace the lamp unit  Before replacing the Lamp unitLamp u nit fixing screws  Removing and replacing the lamp unitLamp unit cover fixing screw HandleReplacing the Auto Cleaning Filter ACF Troubleshooting List of compatible signals Technical InformationPT-DZ6710U Projecting an interlaced signal may cause flicker in screen Display dots of each model PT-DZ6700USpecifications Technical InformationSerial Ceiling mount bracket safeguards  Attachment procedureCeiling mount Dimensions Trademark acknowledgementsUnit mm inch Index Index Avis important concernant la sécurité Cher client PanasonicAvis important concernant la sécurité Déclaration de conformitéPrécautions de sécurité Précautions de sécurité Précautions lors du transport Précautions lors de linstallation Précautions lors de lutilisationAutres Sécurité Instructions de sécuritéRemplacement  Délai de remplacement de lunité de la lampe Avant de remplacer le lUnité de la lampe Vis de la lampe Remplacement  Procédure de remplacement Retirer et remplacer la lampe Connecteur dalimentation électrique du ventilateurRemplacement  Procédure de fixationMontage au plafond

PT-D5000U, PT-DW6300U specifications

The Panasonic PT-DW6300U and PT-D5000U are two powerful projectors designed for large venues, offering advanced features and cutting-edge technology that cater to a variety of professional settings, including corporate environments, educational institutions, and staging events.

The PT-DW6300U is a high-quality 3-chip DLP projector with a brightness level of 6,300 lumens and a resolution of WUXGA (1920x1200). One of its standout features is the Dynamic Iris technology, which enhances contrast and delivers vibrant, sharp images even in brightly lit rooms. The projector is equipped with a dual lamp system, ensuring reliability and extended operational life, which is crucial for continuous use in demanding environments. Additionally, the PT-DW6300U supports a variety of sources, including HDMI, DVI-D, and component inputs, making it versatile for multi-source presentations.

On the other hand, the PT-D5000U is a formidable option with a brightness of 5,000 lumens and a native resolution of XGA (1024x768). This model also employs 3-chip DLP technology, ensuring excellent color fidelity and image stability. A key highlight of the PT-D5000U is its advanced cooling system, which helps maintain optimal operating temperatures, thereby enhancing the projector's longevity. It also features a lens shift capability that allows greater flexibility in installation, enabling users to project images at various angles without compromising quality.

Both projectors utilize Panasonic's proprietary Eco Filter technology, which provides long-term filtration without needing frequent replacements, thus reducing maintenance costs. The automation features of these projectors further enhance usability; both models can be easily integrated into existing AV systems and support network monitoring for remote management.

In summary, the Panasonic PT-DW6300U and PT-D5000U projectors offer impressive brightness, reliability, and advanced features that make them ideal for professional environments. Their combination of high-resolution output, versatile connectivity options, and intelligent cooling systems positions them at the forefront of modern projection technology, catering to the demanding needs of today’s presentations and events. With these models, Panasonic continues to deliver exceptional visual experiences tailored for large audiences, ensuring every detail is clearly visible and impactful.