Panasonic PT-DW6300U  Removing and replacing the lamp unit, Lamp unit cover fixing screw, Handle

Page 31

Replacement

Replacement procedure

Removing and replacing the lamp unit

1.Use a Phillips-head screwdriver to loosen the “lamp unit cover fixing screw” (1 screw) on the back of the projector until the screws turn freely, and remove the lamp unit cover.

Slide the lamp unit cover to the control buttons and pull to remove.

4.Hold the handle of the new lamp unit and replace it in correct direction.

5.Press in the lamp unit until it clicks and make sure the unit is installed securely.

6.Tighten the “lamp unit fixing screws” (3 screws) securely with a Phillips-head screwdriver.

Lamp unit cover fixing screw

Lamp unit cover

2.Use a Phillips-head screwdriver to remove the “lamp unit fixing screws” (3 screws).

3.Hold the handles of the lamp unit and pull the used lamp unit gently from the projector.

Lamp unit fixing screws

Handle

Fan electric power connector

7.Attach the lamp unit cover and tighten the “lamp unit cover fixing screw” (1 screw) securely with a Phillips-head screwdriver.

Slide the lamp unit cover to the hinge side along the guide and push in to attach securely.

Make sure the fan electric power connector of the lamp unit cover is inserted securely to the projector’s connector.

Handle

Lamp unit fixing screws

NOTE:

•The lamp unit and the lamp unit cover must be attached correctly and securely. Failure to do so, the projector will bot be turned on for the protection circuit.

•When the lamp unit is replaced, the duration of usage time will be reset to "0".

Maintenance

ENGLISH - 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents PT-DZ6700U PT-DW6300U PT-D6000U PT-D5000U Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity PT-DZ6710U /PT-DZ6700U /PT-DW6300U /PT-D6000U /PT-D5000UEnvironment care information for users in China Contents Precautions with regard to safety Precautions with regard to safety Do not use chemical treated wipes when cleaning Do not set up the projector outdoorsRemove the used batteries from the remote control promptly Do not put your weight on this projectorOrder to get the best picture quality Replacement of the lamp unit should only be carriedDo not reach for the openings beside the optical Be sure to always remove the lens during transportSecurity OthersSafety cable Power cord Washers AccessoriesRemote control x1 N2QAYB000371 Projector lens cover x1 TKKL5244-1 Power cord secure lockProjector body About Your Projector Top, front and bottom view About Your Projector  Side viewsRemote control IN/OUT terminal. It is effective to use the wired remote When multiple projectors are connected as partNumber, and the remote control 2 digits ID number must Be set to match the intended projector. The defaultOver 10 cm Setting up Cautions when setting the projectors Projection method Attaching the projection lens to the projector Setting upRemoving and attaching the projection lens  Removing the projection lens from the projector Connecting Power cordProjecting  Switching on the projector Adjusting focus, zoom and shift Power switch AC in terminalPT-D5000U Projecting  Switching off the projector Direct power off function  Adjustment range after lens Position optical shift Facing to the projector Remote control operationSetting up the image position automatically Operating rangeChanging the picture aspect ratio Switching the input signalStopping the projection Clearing the on-screen menuResetting to the factory default Using an assigned functionDisplaying the status of the projector Main menu and Sub-menu Menu NavigationRS-232C Display OptionSecurity Menu Navigation Displaying the Main menu  Adjusting with the bar scale items Operating procedure Navigating through the menu Temp indicator Monitor Lamp indicatorsManaging the indicated problems  LAMP1/LAMP2 indicatorStatus in Projector Setup menu Monitor Lamp indicators  Filter indicatorStatus in Projector  Before replacing the Lamp unit Replacement When to replace the lamp unit Replacing the Lamp unitHandle  Removing and replacing the lamp unitLamp unit cover fixing screw Lamp u nit fixing screwsReplacing the Auto Cleaning Filter ACF Troubleshooting Technical Information List of compatible signalsPT-DZ6700U Projecting an interlaced signal may cause flicker in screen Display dots of each model PT-DZ6710UTechnical Information SpecificationsSerial  Attachment procedure Ceiling mount bracket safeguardsCeiling mount Trademark acknowledgements DimensionsUnit mm inch Index Index Cher client Panasonic Avis important concernant la sécuritéDéclaration de conformité Avis important concernant la sécuritéPrécautions de sécurité Précautions de sécurité Précautions lors du transport Précautions lors de lutilisation Précautions lors de linstallationAutres Instructions de sécurité Sécurité Délai de remplacement de lunité de la lampe Remplacement Avant de remplacer le lUnité de la lampe Connecteur dalimentation électrique du ventilateur Remplacement  Procédure de remplacement Retirer et remplacer la lampe Vis de la lampe Procédure de fixation RemplacementMontage au plafond

PT-D5000U, PT-DW6300U specifications

The Panasonic PT-DW6300U and PT-D5000U are two powerful projectors designed for large venues, offering advanced features and cutting-edge technology that cater to a variety of professional settings, including corporate environments, educational institutions, and staging events.

The PT-DW6300U is a high-quality 3-chip DLP projector with a brightness level of 6,300 lumens and a resolution of WUXGA (1920x1200). One of its standout features is the Dynamic Iris technology, which enhances contrast and delivers vibrant, sharp images even in brightly lit rooms. The projector is equipped with a dual lamp system, ensuring reliability and extended operational life, which is crucial for continuous use in demanding environments. Additionally, the PT-DW6300U supports a variety of sources, including HDMI, DVI-D, and component inputs, making it versatile for multi-source presentations.

On the other hand, the PT-D5000U is a formidable option with a brightness of 5,000 lumens and a native resolution of XGA (1024x768). This model also employs 3-chip DLP technology, ensuring excellent color fidelity and image stability. A key highlight of the PT-D5000U is its advanced cooling system, which helps maintain optimal operating temperatures, thereby enhancing the projector's longevity. It also features a lens shift capability that allows greater flexibility in installation, enabling users to project images at various angles without compromising quality.

Both projectors utilize Panasonic's proprietary Eco Filter technology, which provides long-term filtration without needing frequent replacements, thus reducing maintenance costs. The automation features of these projectors further enhance usability; both models can be easily integrated into existing AV systems and support network monitoring for remote management.

In summary, the Panasonic PT-DW6300U and PT-D5000U projectors offer impressive brightness, reliability, and advanced features that make them ideal for professional environments. Their combination of high-resolution output, versatile connectivity options, and intelligent cooling systems positions them at the forefront of modern projection technology, catering to the demanding needs of today’s presentations and events. With these models, Panasonic continues to deliver exceptional visual experiences tailored for large audiences, ensuring every detail is clearly visible and impactful.
Top Page Image Contents