Panasonic PT-DW6300U, PT-D5000U manual Troubleshooting

Troubleshooting

Should any problem persist, contact your dealer.
Problem	Cause	Reference
		page*1
	The power cord may not be connected.	18
	The POWER switch is turned off.	19
Power does not turn on.	No electric supply is at the wall outlet.	19
	TEMP indicator is lit or flashes.	28
	LAMP1/LAMP2 indicator is lit or flashes.	28
	The lamp unit cover has not been securely installed.	31
	The circuit breakers have tripped.	-
	The video signal input source may not be connected to a terminal	CD-ROM
	properly.
	The input selection setting may not be correct.	22
No picture appears.	The BRIGHTNESS adjustment setting may be at the minimum setting.	CD-ROM
	The input source which is connected to the projector may have a
	problem.
	The shutter function may be in use.	22
	The ACF unit may not have been set correctly.	32
	The lens focus may not have been set correctly.	19
The picture is fuzzy.	The projector may not be at the correct distance from the screen.	CD-ROM
	The lens may be dirty.	-
	The projector may be tilted too much.	CD-ROM
	COLOR or TINT adjustment may be incorrect.	CD-ROM
The color is pale or grayish.	The input source which is connected to the projector may not be	-
	adjusted correctly.
	RGB cable is damaged.	-
The control buttons of the	CONTROL PANEL of CONTROL DEVICE SETUP in SECURITY
	menu is disabled. If you have a loss of the remote control while the	CD-ROM
projector do not operate.	CONTROL PANEL is disabled, press and hold the MENU button for
	2 seconds with pressing the ENTER button.
		CD-ROM
	REMOTE CONTROLLER of CONTROL DEVICE SETUP in
	SECURITY menu is disabled.	-
	The batteries may be weak.
The remote control does	The batteries may not have been inserted correctly.	14
		21
not operate.	The remote control signal receptor on the projector may be
	obstructed.	21
	The remote control unit may be out of the operation range.
	Strong light such as fluorescent shine onto the signal receptor.	-
	The remote control ID setting is incorrect.	CD-ROM
On screen menu does not	ON SCREEN button on the remote control may have been pressed	22
appear.	and cleared.
			Maintenance
does not appear.	The color format may not have been set correctly.	CD-ROM
	the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method
The picture does not	There may be a problem with the VCR or other signal source.	-
display correctly.	A signal which is not compatible with the projector is being input.	34
	The cable may be longer than the optional cable.	-
Picture from a computer	The external video output from a laptop computer may not be correct.	-
	(You may be able to change the external output settings by pressing
	varies depending on the type of computer; refer to the documentation
	provided with your computer for further details.)
	The graphic board driver of the computer needs to be updated to the	-
Picture from a computer	latest version.
DVI-D graphic board does	DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting.	CD-ROM
not appear.	The computer may need to be restarted after switching DVI-D IN	-
	setting in DISPLAY OPTION menu of the projector correctly.

*1. CD-ROM: See the functional instructions in the provided CD-ROM.

ENGLISH - 33