Panasonic PT-L6510U Option 2 settings, Setting Unit ID, Registering/Deleting Displaying User Mode

Page 36

OPTION 2 settings

SETTING UNIT ID

UNIT ID is used to set projector IDs when the user wishes to control two or more projectors either simultaneously or separately.

SET ID

ALL

 

 

 

 

 

 

1

2

3

“ALL”: The projectors can be simultaneously controlled from any remote control regardless of their ID settings.

“1”: The projector can be controlled from the remote control with its projector ID set to “1”.

“2”: The projector can be controlled from the remote control with its projector ID set to “2”.

“3”: The projector can be controlled from the remote control with its projector ID set to “3”.

Note

•Unit ID is set to “ALL” by default. Hence ID number need not be set when only one projector is used.

•If the projectors are given ID numbers, their remote controls must be assigned the same ID numbers, respectively.

•If the unit IDs of two or more projectors are set to “ALL”, the user will not be able to control them separately.

•The projector can be turned ON/OFF from the remote control only if the projector ID is set in the remote control. For the details of projector ID setting, see page 15.

Registering/Deleting/

Displaying User Mode

(For RGB/YPBPR signals only)

Once adjustment settings are registered with User Mode, they are automatically loaded each time the projector is powered up. It is not necessary to readjust settings at every power on.

Registering User Mode

(e.g. Registering positioning data with “USER1”)

1.Apply an input signal you want to register, and then adjust the picture position, size, and others.

2.Choose “USER MODE” on “OPTION2” and press the “ENTER” button.

USER MODE

ENTRYUSER1

SELECT

ADJ

 

 

 

ESC

 

 

3.Choose “USER1” using the or buttons and press the “ENTER” button.

Note

•The user address has “USER1” to “USER3”.

4.After recognizing the flashing of the “USER1” address display, press the “ENTER” button again.

5.The above adjusted settings has been registered with “USER1”. Similarly you can also register settings with “USER2” or “USER3”.

Deleting User Mode

(e.g. Deleting the data of USER1)

1.Choose “USER MODE” on “OPTION2” and press the “ENTER” button.

2.Choose “DELETE” using the or buttons.

3.Choose the address (“USER1”) you want to delete data from using the or buttons and press the “ENTER” button.

USER MODE

ENTRY

 

USER1

DELETE

 

USER1

SELECT

ADJ

 

 

 

ESC

 

 

 

 

4.After recorgnizing the flashing of the address display, press the “ENTER” button again to delete the data of the address.

Displaying User Mode

The User Mode can be displayed by following the steps described in “SIGNAL MODE” on page 31.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Model No. PT-L6510U PT-L6600U LCD Projector Commercial UseImportant Safety Notice Dear Panasonic CustomerPage Contents Precautions with regard to safety Precautions with regard to safety Accessories Do not look into the lens while the projector is being usedPrecautions on handling Example of System up SystemRemote Control Location and function of each partProjector Top · Front and Side Location and function of each part Projector Top · Rear and Side Rear control panelInterface panel Using the Remote control unit Loading batteriesEffective control range Using laser pointer Setting projector IDs for remote controlPress the ID SET button on remote control Laser SpecificationsUsing the Remote control unit Using the remote control as a PC mouseUsing the remote control in wired mode Setting-up Installation GeometryProjection Schemes Projection DistancesSetup precautions SCLSetting-up Example of connecting with AV productsExample of connecting with PCs PC with DVI port Control PC USB portExample of connecting with system switcher System switcherPowering Up the Projector Making Initial Adjustment Setting input portPowering Off the Projector Starting to useAdjusting the Vertical Position Picture Starting to useLeveling the Projector Retracting the Leveling FeetUsing the Freeze function Using the Shutter functionAdvice on the installation of exhaust guides Still imageUsing the Digital Zoom D.ZOOM +/- function On-screen menus Menu screensMenu Items Setting Reset the Factory DefaultOn-screen menus Basic Menu OperationsUsing the Index Window function PT-L6510U only Adjusting the picture Signal Mode TV-SYSTEMBAL White balance R/G/B StandardAdjusting the position What Is S1 Video? AspectZoom FocusOption 1 settings RGB FormatLens Shift Back ColorOption 2 settings Lamp PowerSetting Function 1 Func Lamp SelectOption 2 settings Setting Unit IDRegistering/Deleting Displaying User Mode Using the Serial Pin assignments and signal namesConnection Communication RequirementsUsing the Serial Control commandCable specifications Connecting to a computerUsing the remote terminal Pin assignment and controlExample of a control panel layout Indicator Display Condition Check Measures Indication of lamp monitorCleaning and replacing the air filter Cleaning methodLamp replacement period Replacing the lamp unitModel No Lamp unit model No Display after 1800 hoursLamp unit replacement steps Press the Power button to turn off the power Replacing the lamp unitSymptoms Checks Power doesNot turn on No imageSpecifications RGB2 input Audio input For RGB 1/2 VideoRGB output RemoteCompatible RGB/YPBPR Signals AppendixDimensions 480 495 7179 476 18 47/64 495 19 31/64 Unit mm inchTrademark acknowledgments TrademarkConcernant LA Sécurité Précautions concernant la sécurité Ne pas couvrir le filtre et la sortie d’airNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer le projecteur sur des surfaces instables Ne pas placer des récipients de liquide sur le projecteurNe pas mettre d’objets étrangers dans le projecteur Ne pas placer d’objets lourds sur le projecteurPrécautions concernant la sécurité ’utiliser que la pile indiquéePrécautions concernant la manipulation Aver tissements concernant la manipulationAvant de faire le nettoyage et lentretien, sassurer de Remplacement du bloc de lampe Période de remplacement du bloc de lampeModéls No. Numéro de produit du bloc de lampe ATTENTlONProcédure de remplacement de la lampe Remplacement de la lampeRetirez la porte en la tirant vers l’avant La lampe est chaude si elle vient d’être utiliséeAppuyez sur la touche Power pour couper l’alimentation Panasonic Broadcast & Television Systems Company Technical SupportPanasonic Canada Inc
Top Page Image Contents