Panasonic PT-L6510U manual Replacing the lamp unit, Press the Power button to turn off the power

Replacing the lamp unit

8. Insert the power cord plug into the wall outlet and then press the MAIN POWER switch.

Caution

•If the power does not turn on even after turning the MAIN POWER switch “I”, turn the MAIN POWER “O”, confirm that the lamp unit and door are installed correctly, and turn on again.

9.Press the “POWER” button so that a picture is projected onto the screen.

10.Press the “MENU” button to display the MAIN MENU screen, and then press the and buttons to move the cursor to select “OPTION2”.

MENU

INDEX WINDOW

PICTURE

POSITION

AUDIO

ZOOM/FOCUS

LANGUAGE

OPTION 1

OPTION 2

SELECT ENTER

11.Press the “ENTER” button to display the “OPTION2” screen, and then use the

and buttons to select “ LAMP RUNTIME”.

12.Press and hold the “ENTER” button on the projector or the remote control for approximately 3 seconds.

The “LAMP RUNTIME” will change to “L1 RESET [POWER OFF]” or “L2 RESET [POWER OFF]”.

Note

•If the “MENU” button is pressed, the lamp time resetting screen will be cancelled.

OPTION 2

LAMP POWER			HIGH
LAMP SELECT			DUAL
LAMP RUNTIME		1		1820 H
FUNCTION 1			INDEX
SET ID			ALL
USER MODE
SELECT	ADJ			ESC

OPTION 2

LAMP POWER		HIGH
LAMP SELECT		DUAL
L1 RESET		[ POWER OFF ]
FUNCTION 1		INDEX
SET ID		ALL
USER MODE
SELECT	ADJ		ESC

13. Press the and buttons to select for replacement lamp setting.

L1 RESET: Replace the LAMP1

L2 RESET: Replace the LAMP2

L1+L2 RESET: Replace the LAMP1 & LAMP2

14. Press the POWER button to turn off the power.

This will reset the cumulative usage time for the lamp unit to zero.

44