Rockford Fosgate R300-4 manual Specifications subject to change without notice

SPECIFICATIONS

MODEL- PRIME			R300-4
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4	Load Per Channel		50 Watts x 4
2	Load Per Channel		75 Watts x 4
4	Load Bridged		150 Watts x 2
Dimensions:		Height	2.40" (6.10cm)
		Width	7.67" (19.49cm)
		Length	17.09" (43.40cm)
Amplifier Fuse Rating (Amp)			(2) 25A ATC
Battery Fuse Rating (Amp) External (Not Supplied)			50A
	“A” Weighted Signal to Noise Ratio
	Referenced to 1 Watt into 4 ohms		≥70 dB
	“A” Weighted Signal to Noise Ratio
	Referenced to rated output into 4 ohms		≥90 dB
	Crossover Slope		12dB/octave Butterworth
	Crossover Frequency		High Pass @ 80Hz, Low Pass variable from 50Hz to 250Hz
	Frequency Response		20Hz to 20KHz ±1dB
	Signal Voltage Adjustment Range		Variable from 150mV to 8V (RCA Input)
	Protection		Short circuit protection shut downs the amplifier in
			case of very low impedance or shorted speaker wires.
	Punch Level		Selectable between 0dB, +6dB and +12dB @ 45Hz
	Input Impedance		20K ohms
	Operating Voltage		9 to 16 Volts DC
	Balanced Inputs		No
	CMRR (Common Mode Rejection Ratio)		>40dB @ 1KHz
	Damping Factor		>200
	THD+N (Total Harmonic Distortion + Noise)		< 1.0% @ 4 ohm

These specifications are Amplifier Power Standard CEA-2006 Compliant

Specifications subject to change without notice

10