7UDQVPLVVLYH6HQVLQJ0RGH
In transmissive sensing mode, a sensor detects a light shining through a web, notch, or hole in
%ODFN0DUN6HQVLQJ0RGH
In black mark sensing mode, a sensor detects the black marks that are printed on the back of the label liner for each label. The label length and top of label are determined by the location of the black mark.
0HGLD7UDQVSRUW0RGHV
7HDU2II0RGH
When the media is in the rest (idle) position, the webbing between labels is over the
After a label is printed, the media feeds forward until the end of the label is past the
When a quantity of labels is required, a format for printing a batch of labels can be sent to the printer. Once a label is printed, the media feeds forward to the start of the next label and printing continues. In this way, the printer prints the batch and stops when it reaches the quantity required.
When a quantity of individual labels is required, the format for printing a batch of labels can still be sent to the printer. The operator can use the PAUSE key to cycle the printing one label at a time. The operator can then tear off each label before printing the next one.
24 | Zebra |