Ÿ›y‹€ØÃAÏ‹Ÿ›ÍA›cÍA’‹OÃAÏ‹Ÿ›
2SWLRQ6ZLWFKHV
These switches are located at the rear of the printer above the Signal Interface Cable Connection. See Figure 16.
In the tables on the following page, an “R” means the switch is OFF (positioned to the right), while an “L” means the switch is ON (positioned to the left). All switches are in the OFF position when the printer is shipped from the factory.
Figure 16
Figure 17
Zebra | 39 |