Operation, Adjusting Gain, Panel Install

Rockford Fosgate P325.I, P600..I bd manual Operation, Adjusting Gain, Outside Panel Install

OPERATION

Outside Panel Install

Mounting Clip

3. Using the screws supplied, install the mounting clip.

4. Slip the remote onto the mounting clip until it snaps into place.

5. Connect the cable to the remote.

Panel Install

6. Cut out a 2”x 7/8” hole in the panel, with a maximum panel thickness of

3/8”. Ensure there is enough room within the panel area for connection.

7. Route the cable through the hole and connect to the remote.

8. Press the remote into the panel cutout until it clicks in place.

Operation

9. Turn clockwise to add Punch to amplifier bass frequencies.

CAUTION:Overexcursion and subsequent damage may occur at high levels of boost

NOTE:An optional Para-Punch Remote Bass is available which adds an adjustable center frequency control with the adjustable boost control.

ADJUSTING GAIN

To adjust the gain setting, turn the amplifier gains all the way down (counter-clockwise).Turn the source unit volume up until distortion is audible and then turn it down a bit until the distortion is inaudible.This will be about all the way up on most source units. Next, increase the amplifier gain setting until adequate volume is achieved. Rockford Fosgate source units do not distort, so the volume can be used at maximum setting.

NOTE:Best signal to noise and dynamic range are realized with the gain at minimum. Most users find adequate gain and volume is achieved at about halfway in the adjustment range.

CAUTION:Avoid setting the amplifier gain very high as noise and distortion will increase significantly.

NOTE:For a more in depth setting procedure, contact Rockford Technical Support.

P325.I, P600..I bd specifications

Rockford Fosgate has long been synonymous with high-performance audio equipment, and their series of amplifiers, namely the P325.1 and P600.1bd, continue to uphold this legacy. Engineered to deliver uncompromising sound quality and powerful output, these amplifiers are ideal for car audio enthusiasts looking to elevate their in-car listening experience.

The P325.1 is a compact monoblock amplifier designed to supply robust power to subwoofers. With a power output of 325 watts RMS at 2 ohms, it strikes an excellent balance between size and performance. This amplifier features a high-pass crossover that can be used to filter out unwanted frequencies, ensuring that your subwoofer receives only the bass it needs to perform optimally. The adjustable subsonic filter further allows users to tune the amplifier according to their specific audio preferences, ensuring clean and powerful bass reproduction.

On the other hand, the P600.1bd ups the ante with a significant power output of 600 watts RMS at 1 ohm, making it well-suited for larger subwoofers or more demanding sound systems. This amplifier incorporates Rockford Fosgate's innovative Class BD technology, which allows for higher efficiency and improved thermal performance. The Class BD design also minimizes distortion at higher volumes, rendering a cleaner sound that preserves the integrity of the audio source. The P600.1bd includes a variable low-pass filter and phase switch, enabling users to fine-tune the soundstage according to their vehicle's acoustics.

Both amplifiers are designed with premium components, featuring a cast aluminum chassis that not only enhances durability but also promotes effective heat dissipation. This is crucial for ensuring the longevity of the amplifiers during prolonged use. Additionally, these models come equipped with RCA inputs, screw-type terminals for easy wiring, and a sleek design that fits seamlessly into any vehicle setup.

In conclusion, the Rockford Fosgate P325.1 and P600.1bd amplifiers are exceptional choices for audio aficionados seeking powerful and precise sound amplification. With advanced technology, customizable settings, and robust construction, they stand out as reliable components for any high-performance car audio system. Whether you are a casual listener or a dedicated audiophile, these amplifiers offer a pathway to an enhanced listening experience on the road.