SATO ct4i manual Print, Sensing, Media, Ribbon

Unit 2: Technical Data

PRINT

Method	DT models: Direct Thermal only
	TT models: Thermal Transfer and Direct Thermal (switchable)
	2, 3, 4, 5, 6 Inches Per Second (CT408i)
Maximum Speed (selectable)	2, 3, 4 Inches Per Second (CT412i)
	2, 3 Inches Per Second (CT424i)
	CT408i: 203 Dots Per Inch (8 dpmm)
Resolution	CT412i: 305 Dots Per Inch (12 dpmm)
	CT424i: 609 Dots Per Inch (24 dpmm)
Maximum Print Width	4 in. (104 mm)
Maximum Print Length	15.75 in. (400 mm)
SENSING
Gap	Sensitivity Adjustable
Reflective Eye-Mark	Sensitivity Adjustable
Head Open	Fixed
Media Out	Fixed (always enabled)
Ribbon Out	Fixed (always enabled)
MEDIA
	Media Width: 1.0 in. - 4.5 in. (25-115 mm)
Width	With backing paper: 1.0 - 4.0 in. (28 - 118 mm)
	Note: For Dispensing Mode, specifications may vary depending on the requirements
Length	0.5 -16.0 in. (15 - 397 mm)
	1.0 - 15.7 in. (18 - 400 mm with Backing Paper)
Type	Direct Thermal / Thermal Transfer depending on print model (DT or TT)
	Roll stock / Fan-fold
	Roll stock: Max. outer diameter: 4.3 in. (110 mm)
Configuration	Wound face-out, Inner diameter of roll: 1.5 in. (40 mm)
	Fanfold: Max. stack height: 3.9 in. (100 mm) (external supply)
Thickness	0.003 in.- 0.01 in. (0.08 - 0.19 mm)
Wind Direction	Face Out
RIBBON
Width	4.3 in. (111 mm)
Length	328.0 feet (100 M)
Wound	Face Out
Core Diameter	0.5 in. (12.7 mm)
Roll Diameter	1.5 in. (39 mm)

CT4i Series Operator Manual 2-3