October 2006Preinstallation requirements
Step | Description | Check |
|
|
|
5 | Place the 703t server in the chosen location (see page 48). | ❒ |
|
|
|
6 | Set the DIP switches on the modem (see page 51). | ❒ |
|
|
|
7 | Connect the 703t server and devices as follows: |
|
| Connect the monitor, keyboard, and mouse (see page 55). | ❒ |
| Connect the modem (see page 55). | ❒ |
| Connect the 703t server to the ELAN hub (see page 58). | ❒ |
| ATTENTION |
|
| To comply with EMC requirements, a Class A hub must be |
|
| located 10 m (33 ft.) away from the 703t server. |
|
| Note: If you are connecting the optional CLAN, do not power | ❒ |
| up unless your antivirus programs and Nortel security updates |
|
| are installed first. |
|
| Connect the 703t server to the CLAN hub (optional); (see |
|
| page 60). |
|
| ATTENTION |
|
| To comply with EMC requirements, a Class A hub must be |
|
| located 10 m (33 ft.) away from the 703t server. |
|
| Install the software feature dongle (see page 61). | ❒ |
| Connect the power cords for all devices, and then power | ❒ |
| them up (see page 63). |
|
|
|
|
8 | Start the 703t server (see page 65). | ❒ |
|
|
|
703t Server Hardware Installation | 35 |