703t server description | Standard 1.04 |
Slot definition and numbering
In the following table, the term “slot” refers to the available slot openings in the chassis, not the PCI connectors inside the server.
The slots are numbered from the bottom of the server to the top. Slot 1 is the bottom slot in the chassis when the chassis is standing upright.
| CallPilot- | Meridian 1 |
| assigned | or |
Slot number | board labela | Succession 1000 |
|
|
|
7 | Not used | Not used |
(not a slot) |
|
|
|
|
|
PCI slot 6 | BRD06 | RAID card |
(full length) |
|
|
|
|
|
PCI slot 5 | BRD05 | Not used |
(full length) |
|
|
|
|
|
PCI slot 4 | BRD04 | MPB96 board |
(full length) |
|
|
|
|
|
PCI slot 3 | BRD03 | Not used |
(full length) |
|
|
|
|
|
PCI slot 2 | BRD02 | Not used |
(full length) |
|
|
|
|
|
PCI slot 1 | BRD01 | Not used |
(full length) |
|
|
a. In CallPilot Manager applications, the CallPilot- assigned board label may appear. This label corresponds to the slot number. For example, BRD01 refers to the board in slot 1.
24 | CallPilot |