MGE UPS Systems 9 kVA, 4.5 kVA, 6 kVA, 12 kVA user manual Introduction

Page 2

Introduction

Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.

The Comet EXtreme range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your UPS.

MGE UPS SYSTEMS pays great attention to the environmental impact of its products. Measures that have made Comet EXtreme a reference in environmental protection include: ◗Production in an ISO 14001 certified factory;

◗Recycling of Comet EXtreme at the end of its service life.

To discover the entire range of MGE UPS SYSTEMS products and the options available for the Comet EXtreme range:

◗We invite you to visit our Web site at www.mgeups.com

(page: www.mgeups.com/products/pdt230/smallups/extreme/extrem10.htm), ◗Or contact your MGE UPS SYSTEMS representative.

Page 2 - 51033212EN/AC

Image 2

Contents Installation Comet EXtremeIntroduction Pictograms Using this documentForeword Contents Failure of AC input power and operation on battery power Glossary Index6 kVA tower models PresentationComet EXtreme range 6 kVA rack models12 kVA tower models 12 kVA rack models Comet EXtreme 9 and 12 kVA BackComet EXtreme 4.5 and 6 kVA Battery extensions for 4.5 or 6 kVA Comet EXtreme EPO Emergency Power OffBattery extensions for UPS backup times of 80 minutes OptionsBattery extensions for 9 or 12 kVA Comet EXtreme CLAAlarms Battery Load Remaining Control panelUnpacking and checks InstallationElectronic module Battery module Electronic module Installation of the rack version Rack mounting diagram with railsBattery-module connections Check that the battery circuit breaker 2 is OFFInstallation of the communications-card option Connection to the RS 232 communications port optionalAlways connect the earthing wire first Connection to the connection modulesON-LINE operating mode OperationBargraph indications When button 15 is pressedStart-up Failure of AC input power and operation on battery power Function Personalizable function Default settingPersonalization On / OFF conditions tabOutput tab Battery tabPersonalizable function Default setting Options By-pass tabConnected equipment is no longer supplied with power ShutdownFrench Training Center on Montbonnot site MaintenanceTroubleshooting USA Training Center on Costa Mesa siteMaintenance Replacement of the electronic module Disconnecting the connection moduleReconnecting the connection module Connected equipment is again protected by the UPSThis product has been designed to respect the environment UPS recycling at the end of service lifeEnvironment PackingGlossary ON-LINE modeAppendices Manual bypassTolerance for AC-power Sleep modeStart on battery power Out of toleranceIndex UPS Driver32 51033212EN/AC