MGE UPS Systems 4.5 kVA Installation, Unpacking and checks, Electronic module Battery module

Page 12

2. Installation

2.1 Unpacking and checks

Comet EXtreme 4.5 and 6 kVA

Electronic module

battery module

22RS 232 communications cable.

23CD ROM with "Solution Pac" and "UPS Driver" softwares.

24Quick Start documentation.

Page 12 - 51033212EN/AC

22

23

24

25

2223

26

24

25

25

27

25 27

26

25Installation and user manual.

26Telescopic rails for mounting in 19" bay with mounting hardware.

27Cable for connection to battery module.

Image 12

Contents Installation Comet EXtremeIntroduction Using this document ForewordPictograms Contents Failure of AC input power and operation on battery power Glossary IndexPresentation Comet EXtreme range6 kVA tower models 6 kVA rack models12 kVA tower models 12 kVA rack models Back Comet EXtreme 4.5 and 6 kVAComet EXtreme 9 and 12 kVA EPO Emergency Power Off Battery extensions for UPS backup times of 80 minutesBattery extensions for 4.5 or 6 kVA Comet EXtreme OptionsBattery extensions for 9 or 12 kVA Comet EXtreme CLAAlarms Battery Load Remaining Control panelInstallation Electronic module Battery moduleUnpacking and checks Electronic module Installation of the rack version Rack mounting diagram with railsBattery-module connections Check that the battery circuit breaker 2 is OFFInstallation of the communications-card option Connection to the RS 232 communications port optionalAlways connect the earthing wire first Connection to the connection modulesON-LINE operating mode OperationWhen button 15 is pressed Start-upBargraph indications Failure of AC input power and operation on battery power Personalizable function Default setting PersonalizationFunction On / OFF conditions tabBattery tab Personalizable function Default setting OptionsOutput tab By-pass tabConnected equipment is no longer supplied with power ShutdownMaintenance TroubleshootingFrench Training Center on Montbonnot site USA Training Center on Costa Mesa siteMaintenance Replacement of the electronic module Disconnecting the connection moduleReconnecting the connection module Connected equipment is again protected by the UPSUPS recycling at the end of service life EnvironmentThis product has been designed to respect the environment PackingON-LINE mode AppendicesGlossary Manual bypassSleep mode Start on battery powerTolerance for AC-power Out of toleranceIndex UPS Driver32 51033212EN/AC