MGE UPS Systems 4.5 kVA, 9 kVA Back, Comet EXtreme 4.5 and 6 kVA, Comet EXtreme 9 and 12 kVA

Page 8

1. Presentation

1.2 Back

Comet EXtreme 4.5 and 6 kVA

1 RS232 communications port.

2	Battery circuit breaker.

3 Communications-card option.

4	EXB battery module connectors.
5	Connector for battery extension modules.
6	Rating plate.
7	Manual by-pass switch.
8	Connection module.
9	Output terminal block.
10	Input terminal block.

Comet EXtreme 9 and 12 kVA

4 EXB battery modules connectors.

Page 8 - 51033212EN/AC

Image 8

Contents Installation Comet EXtremeIntroduction Pictograms Using this documentForeword Contents Failure of AC input power and operation on battery power Glossary IndexPresentation Comet EXtreme range6 kVA tower models 6 kVA rack models12 kVA tower models 12 kVA rack models Comet EXtreme 9 and 12 kVA BackComet EXtreme 4.5 and 6 kVA EPO Emergency Power Off Battery extensions for UPS backup times of 80 minutesBattery extensions for 4.5 or 6 kVA Comet EXtreme OptionsBattery extensions for 9 or 12 kVA Comet EXtreme CLAAlarms Battery Load Remaining Control panelUnpacking and checks InstallationElectronic module Battery module Electronic module Installation of the rack version Rack mounting diagram with railsBattery-module connections Check that the battery circuit breaker 2 is OFFInstallation of the communications-card option Connection to the RS 232 communications port optionalAlways connect the earthing wire first Connection to the connection modulesON-LINE operating mode OperationBargraph indications When button 15 is pressedStart-up Failure of AC input power and operation on battery power Personalizable function Default setting PersonalizationFunction On / OFF conditions tabBattery tab Personalizable function Default setting OptionsOutput tab By-pass tabConnected equipment is no longer supplied with power ShutdownMaintenance TroubleshootingFrench Training Center on Montbonnot site USA Training Center on Costa Mesa siteMaintenance Replacement of the electronic module Disconnecting the connection moduleReconnecting the connection module Connected equipment is again protected by the UPSUPS recycling at the end of service life EnvironmentThis product has been designed to respect the environment PackingON-LINE mode AppendicesGlossary Manual bypassSleep mode Start on battery powerTolerance for AC-power Out of toleranceIndex UPS Driver32 51033212EN/AC