Royal Sovereign RSS-1200, RSS-1050, RSS-685 owner manual Control of Roller Pressure

Page 10

CONTROL OF ROLLER PRESSURE

Methods of controlling pressure of the roller

1.For setting, pull the pressure lever out and turn the lever to following the indication.

2.10~13mm Board : Mode that you can laminate 10~13mm(1/3" to 1/2")

3.5mm Board : Mode that you can laminate 5mm(1/4") hard board

4.1mm hard board : Mode that you can laminate 1mm(40mil) hard board

5.Laminating : Mode that you can do laminate 25mic(1mil) to 250mic(10mil)

- 10 -

Image 10

Contents Royal Sovereign Laminators Table of Contents Safety Precautions IntroductionSpecifications CharacteristicsDescription RSS-1200 RSS-1050 RSS-685 Names of Major Parts of Machine HOW to Control Tension Adjustment of Film Tension and LocationsHOW to Adjust Alignment Setting UP Film Hanging Film HOT FilmCold Film Control of Roller Pressure Methods of controlling pressure of the rollerInstructions for Control Panel TermsLCD Window Functions of Buttons REV Stop RUNSpeed controls HOW to USE ButtonsSet the upper/ lower heat shoes Button & DisplayMemorize working condition Use the memorized working conditionCheck current temperature on the shoes Cold modeCheck the laminating length & How many laminated papers Laminating Steps HOT LaminatingUseful Information Laminating Speed at each levelTemperature/Speed adjustment guide Temp SpeedCold Laminating ReferenceMethod for Using Cutter Tips for Remote Control and Foot SwitchCross Cutter Slitters Important Safety Concerns MaintenanceSymptom Cause Check point Its not out of orderLimited Warranty Duration of Limited WarrantyMemo