3.HOW TO USE BUTTONS
***Set the upper/ lower heat shoes***
Button & Display
UPPER
LOWER
1.Temperature available range from 0°C (32°F) to 160°C (320°F).
2.Set temperature of upper shoe.
Press upper button then you will see the LCD is
blinking 6 times. Before blinking is finished, press
or 
to set the temperature.
3.Set temperature of lower shoe.
Press lower button and choose the arrow button the same way to set temperature of upper shoe.
4 
Each time you press the button, it will change 1°C (2°F). If you press the button more than 2 seconds, temperature will change automatically until you press the button again.
5. Buzzer is ringing each time you press the button.
***Speed controls***
1. The operator can use 9 different lamiantion speeds.
2. Press SPEED | button then speed display mode |
is blinking 6 times | |
Before blinking finish, the operator can change the | |
speed with | or |
3. Each time you press the button, buzzer will ring.
SPEED 
- 14 -