Royal Sovereign RSS-1200, RSS-1050, RSS-685 Check current temperature on the shoes, Cold mode

Page 16

Check current temperature on the shoes.

	1.This function allows you to check the current
	temperature on the shoes.
	2.Press	T-CHECK	then temperature is shown on the
	display while display is blinking.
	3.It shows current temperature 5 times then returns
	to temperature which the operator has set.
	4.It shows "LO" when the temperature is 40°c (104°F)
	or below. Only when the current temperature is over
T-	41°c (106°F) will it show the exact temperature on
T-CHECK

on the shoes.

Cold mode

		1.You can do cold lamination with this function.
		2.Press the	C/HOT	button to show "COLD"
			C/HOT
		on the display.
		3.Speed will always show 2 and there is no memory
		of working condition shown.
		4.Speed can be varied 1 or 2 by selecting
				button.
		5.You release the machine from cold mode by
		pressing	MEMORY	button.
	SPEED	6.Everytime you press the button, buzzer is ringing
	SPEED	7.ST/BY mode is not working at COLD mode.
		7.ST/BY mode is not working at COLD mode.
	MEMORY
C/HOT	ST/BY
COLD	ST/BY

- 16 -

Image 16

Contents Royal Sovereign Laminators Table of Contents Safety Precautions IntroductionSpecifications CharacteristicsDescription RSS-1200 RSS-1050 RSS-685 Names of Major Parts of Machine HOW to Control Tension Adjustment of Film Tension and LocationsHOW to Adjust Alignment Setting UP Film Hanging Film HOT FilmCold Film Control of Roller Pressure Methods of controlling pressure of the rollerInstructions for Control Panel TermsLCD Window Functions of Buttons REV Stop RUNHOW to USE Buttons Set the upper/ lower heat shoesSpeed controls Button & DisplayMemorize working condition Use the memorized working conditionCheck current temperature on the shoes Cold modeCheck the laminating length & How many laminated papers Laminating Steps HOT LaminatingUseful Information Laminating Speed at each levelTemperature/Speed adjustment guide Temp SpeedCold Laminating ReferenceMethod for Using Cutter Tips for Remote Control and Foot SwitchCross Cutter Slitters Important Safety Concerns MaintenanceSymptom Cause Check point Its not out of orderLimited Warranty Duration of Limited WarrantyMemo