Royal Sovereign RSS-1050, RSS-1200, RSS-685 owner manual LCD Window

Page 12

1.LCD WINDOW

1.Initial display status.

It displays the last working condition

when the power is turned on.

2. is displayed

when the preset temperature is reached.

3. Blinking

Indicates to wait till blinking stops.

Current temperature is higher or lower than the preset temperature.

4.

Saving electricity status.

5.Temperature

1)Shows the preset temperature.

2)You can check the current temperature on the heat shoe by pressing T-Check button.

6.Speed

*9 different speed option. (SPEED1->1.0m(3.3ft)/min. SPEED9-> 6.0m(19.7ft)/min.)

7.PRGM

*9 different memory cell (address) You can memorize 9 different working conditions.

- 12 -

Image 12

Contents Royal Sovereign Laminators Table of Contents Safety Precautions IntroductionCharacteristics SpecificationsDescription RSS-1200 RSS-1050 RSS-685 Names of Major Parts of Machine Adjustment of Film Tension and Locations HOW to Control TensionHOW to Adjust Alignment Setting UP Film Hanging Film HOT FilmCold Film Control of Roller Pressure Methods of controlling pressure of the rollerInstructions for Control Panel TermsLCD Window Functions of Buttons REV Stop RUNHOW to USE Buttons Set the upper/ lower heat shoesSpeed controls Button & DisplayMemorize working condition Use the memorized working conditionCheck current temperature on the shoes Cold modeCheck the laminating length & How many laminated papers Laminating Steps HOT LaminatingUseful Information Laminating Speed at each levelTemperature/Speed adjustment guide Temp SpeedCold Laminating ReferenceTips for Remote Control and Foot Switch Method for Using CutterCross Cutter Slitters Important Safety Concerns MaintenanceSymptom Cause Check point Its not out of orderLimited Warranty Duration of Limited WarrantyMemo