Step 9 Installing the Chip Block Unit
You are now in a position to remove the Epson cartridges from the printer head, see Fig.20 & Fig.21 below.
Fig. 20
Fig. 21
Ensure that you hold the Colour chip block as indicated in Fig.22 and do not touch the contacts as this can cause damage or failure.
Ensure that you locate the CORRECT chip block making sure that the two legs either side are facing down as indicated in Fig. 22. PLEASE NOTE INSERTING THE CHIP BLOCK INCORRECTLY CAN CAUSE DAMAGE TO
THE CONTACTS.
Fig. 22
Fig. 23
When you have installed the Colour chip block within the printer head you can now position and install the Chip Support Bar as illustrated over the page.
10