Step 11 Install Injectors
Please place the set of 6 injectors in the printer carriage that is now parked in the centre of the printer.
Carefully align them, and when you are happy the injectors are in position. PLEASE BE CAREFUL NOT TO PUSH TOO HARD, AS THIS WILL CAUSE DAMAGE TO THE INJECTOR & PRINTER HEAD. Push the injectors home until you feel a positive seated position, see Fig.28 below. When all are in, they should look like Fig.29 below.
Fig.28
Fig.29
Picture shows injectors fully installed in a
R1400
Step 12 Fixing the Special Printer Lid
Attach the special printer lid that has been supplied making sure that none of the tubing catches or squashes between the lid and housing, as this will stop any ink flowing into the printer heads. At this stage you MUST align the tubes in the correct manner as illustrated in Fig.30. Align & position the special lid as indicated in Fig.31.
Fig.30
Fig.31
12