Step 7 Assembling the Tubing to the Bottle Caps
When you have completed the above process insert the correct tubes to the correct ink bottles. PLEASE TAKE
CARE when doing this as if this is connected incorrectly there is no turning back see Fig.13 & Fig.14
Fig.13
Step 8 Priming the Ink Through the Injectors
Fig.14
You are now ready to start the ink priming process starting with the YELLOW. This process is carried out by inserting the 10ml syringe and wing adaptor at the base of the injector.
Wing Adaptor
Shown
Fig.15
8