Check Printer Condition

If you have a brand new printer, follow the Epson instructions for setting up your printer. Use the Epson cartridges that came with the printer. Follow normal installation instructions for the software. Test the printer by printing pictures. Learn how to use the Epson utilities to run a Nozzle pattern check and to run a Cleaning Cycle.

Make sure that the printer can produce a perfect nozzle pattern before proceeding with Eco-Flo installation.

If you have been using the printer in the past, just make sure it produces a perfect nozzle pattern before proceeding with the Eco-Flo installation. If the Nozzle pattern has any gaps whatsoever, then run cleaning cycles until it prints perfectly.

DO NOT INSTALL THE ECO-FLO IF YOUR PRINTER IS NOT FULLY FUNCTIONAL

Disconnecting Power From the Printer

Push, but do not hold the INK button on the printer. This will move the injectors to the “replacement” position. After they move to this position, which is just slightly to the left of the parked position, SWITCH OFF THE POWER AT THE WALL SOCKET. Now the injector head can be moved from side to side by hand. We will tell you later when to reconnect the printer power supply. Remove the original Epson injectors from the printer (Power is disconnected). Set them aside on some paper towel. DONOT throw away, you may need them someday. Wrap in a zip-lock plastic bag for cool dry safe keeping.