Epson R1400 Preparation of The Clamps & Inks, Positioning the Ink Bottles in The Tray

Page 7

Step 5 Preparation of The Clamps & Inks

You are now ready to attach the tube clamps to the tubes as indicated in Fig.11 below.

Now please fill all the bottles with the correct inks; please ensure that all ink has been filled correctly as indicated by the bottle caps that are colour coded, see Fig.12 below.

Fig.11

Step 6 Positioning the Ink Bottles in The Tray

Fig.12

You are now ready to position the ink bottles in the bottle holder tray as indicated below on the LEFT hand side on the same level as the printer.

LC

C

BK

M

Y

LM

R1400 Setup

7

Image 7

Contents What is included in your Eco-Flo R1400 Kit What you will need to Install the Eco-Flo R1400Epson R1400 Eco-Flo Shown Check List for Components Check Printer Condition Disconnecting Power From the PrinterRemoving the Injector Lid Installation of Your ECO-FLO KITBottle Preparation Moving the Printer HeadTube Preparation Showing Tubes stripped back Positioning the Ink Bottles in The Tray Preparation of The Clamps & InksAssembling the Tubing to the Bottle Caps Page Contacts Installing the Chip Block UnitInstalling the Chip Support Bars Fixing the Special Printer Lid Install InjectorsUnlocking the Tube Clamps 47mm Install Final Tube Clip Installing the Foam Strip 43mm HOW the Special Permachip Works Testing the SystemRemoving the Injectors On the Compact Disc FAQ»S & Caring For Your Eco-Flo √ Read Carefully