Epson R1400 installation instructions Showing Tubes stripped back

Page 6

Step 4 Tube Preparation

Using a pair of scissors snip gently at the end of each tube. Please see Fig.8 below.

Fig.8

Strip back all the tubes by approx 150mm. Please note when assembling the tubes to the bottle caps you may need to strip back more of the tubing in order for the bottles to be seated correctly within the bottle tray.

Fig.9

Fig.10 showing

tubes stripped back

Image 6

Contents What you will need to Install the Eco-Flo R1400 What is included in your Eco-Flo R1400 KitEpson R1400 Eco-Flo Shown Check List for Components Disconnecting Power From the Printer Check Printer ConditionInstallation of Your ECO-FLO KIT Removing the Injector LidMoving the Printer Head Bottle PreparationTube Preparation Showing Tubes stripped back Preparation of The Clamps & Inks Positioning the Ink Bottles in The TrayAssembling the Tubing to the Bottle Caps Page Installing the Chip Block Unit ContactsInstalling the Chip Support Bars Install Injectors Fixing the Special Printer LidUnlocking the Tube Clamps 47mm Install Final Tube Clip Installing the Foam Strip 43mm Testing the System HOW the Special Permachip WorksRemoving the Injectors On the Compact Disc FAQ»S & Caring For Your Eco-Flo √ Read Carefully