Epson R1400 installation instructions On the Compact Disc

Page 20

ON THE COMPACT DISC :-

THERE IS A CD SUPPLIED WITH YOUR KIT. ON THE CD ARE COPIES OF THE FOLLOWING :-

1ECO-FLO INSTALLATION INSTRUCTIONS FOR ALL TYPES OF PRINTERS AND SYSTEMS

2TROUBLE SHOOTING GUIDE

3INK PURGE TEST FILES AND TONE CHARTS

4ICC PROFILES FOR USE WITH PERMAJET COLOUR INK AND PAPER COMBINATIONS

5CURVES FOR USE WITH MONOCHROMEPRO INK SYSTEM.

IN ORDER TO USE THE PERMAJET INK SYSTEM TO ITS FULL POTENTIAL, YOU SHOULD NOW TAKE THE TIME TO OPEN

THE ENCLOSED CD AND PROCEED TO READ THE FULL

SECTION ON PROFILES AND THE

“HOW TO INSTALL AND USE ICC PROFILES” DOCUMENT.

FULL DATA IS INCLUDED IN THIS FILE TO EXPLAIN HOW TO GET THE FULL BENEFITS OF COLOUR MANAGEMENT AND BEST RESULTS WITH YOUR IMAGES.

20

Image 20
Contents Epson R1400 Eco-Flo Shown What you will need to Install the Eco-Flo R1400What is included in your Eco-Flo R1400 Kit Check List for Components Disconnecting Power From the Printer Check Printer ConditionInstallation of Your ECO-FLO KIT Removing the Injector LidTube Preparation Moving the Printer HeadBottle Preparation Showing Tubes stripped back Preparation of The Clamps & Inks Positioning the Ink Bottles in The TrayAssembling the Tubing to the Bottle Caps Page Installing the Chip Block Unit ContactsInstalling the Chip Support Bars Install Injectors Fixing the Special Printer LidUnlocking the Tube Clamps 47mm Install Final Tube Clip Installing the Foam Strip 43mm Testing the System HOW the Special Permachip WorksRemoving the Injectors On the Compact Disc FAQ»S & Caring For Your Eco-Flo √ Read Carefully