Epson R1400 Moving the Printer Head, Bottle Preparation, Tube Preparation

Page 5

Step 2 Moving the Printer Head

You are now able to move the printer head manually to the centre area of the printer. See below.

Fig.6

Step 3 Bottle Preparation

Locate the coloured bottle caps and straight lengths of plastic tubes. Insert the straight tube firmly into the bottom of each bottle cap see Fig.7 below.

Step 4 Tube Preparation

Fig.7

Image 5

Contents Epson R1400 Eco-Flo Shown What you will need to Install the Eco-Flo R1400What is included in your Eco-Flo R1400 Kit Check List for Components Check Printer Condition Disconnecting Power From the PrinterRemoving the Injector Lid Installation of Your ECO-FLO KITTube Preparation Moving the Printer HeadBottle Preparation Showing Tubes stripped back Positioning the Ink Bottles in The Tray Preparation of The Clamps & InksAssembling the Tubing to the Bottle Caps Page Contacts Installing the Chip Block UnitInstalling the Chip Support Bars Fixing the Special Printer Lid Install InjectorsUnlocking the Tube Clamps 47mm Install Final Tube Clip Installing the Foam Strip 43mm HOW the Special Permachip Works Testing the SystemRemoving the Injectors On the Compact Disc FAQ»S & Caring For Your Eco-Flo √ Read Carefully