Epson R1400 installation instructions Installing the Foam Strip

When you have carefully installed and aligned the tube clip in its correct location, press firmly ensuring that the tube clip is clicked and stuck down to the printer body, as illustrated in Fig.42 below.

Fig.42

Step 16 Installing the Foam Strip

The purpose of the Foam Strip is to ensure that the tubing on the Eco-Flo travels under the printer body correctly, as well as to cushion the tubes from hitting the printer casing when in motion.

Fig.43

Move the head manually across to the left

and bend back the Foam Strip as illustrated above.

Fig.44

Peel back the yellow sticky tape ready for installation on the printer body.

IMPORTANT!

Please note from the diagram on the left, the positioning of the Foam Strip is crucial in that only one tube should be visible from the above angle. Please follow the steps over the page.

16