Epson R1400 installation instructions Removing the Injectors

Page 19

Step 18 Removing the Injectors

Please note before removing the injectors you MUST clamp the tubing on the relevant injectors by LOCKING the White tube clamps to avoid air traveling up the injector and into the tube. At this point press the ink change button on the front panel of the printer so that you are ready to change or remove the injectors, this function will bring the head unit to the left.

Locking the tube

clamps

Image 19

Contents What is included in your Eco-Flo R1400 Kit What you will need to Install the Eco-Flo R1400Epson R1400 Eco-Flo Shown Check List for Components Check Printer Condition Disconnecting Power From the PrinterRemoving the Injector Lid Installation of Your ECO-FLO KITBottle Preparation Moving the Printer HeadTube Preparation Showing Tubes stripped back Positioning the Ink Bottles in The Tray Preparation of The Clamps & InksAssembling the Tubing to the Bottle Caps Page Contacts Installing the Chip Block UnitInstalling the Chip Support Bars Fixing the Special Printer Lid Install InjectorsUnlocking the Tube Clamps 47mm Install Final Tube Clip Installing the Foam Strip 43mm HOW the Special Permachip Works Testing the SystemRemoving the Injectors On the Compact Disc FAQ»S & Caring For Your Eco-Flo √ Read Carefully