Epson U230 manual Connecting to an Ethernet interface

Page 26

Confidential

Note:

Passing the USB cable through the wire locking saddle as shown in the figure will keep the connection from coming loose.

USB upstream connector

UB-BOARD

Locking wire saddle

USB cable

USB downstream connector	DM connector
(USB HUB: only for UB-U01)
(USB HUB: only for UB-U01)

Attaching the locking wire saddle

3.Connect the USB cable from the host PC to the USB upstream connector.

4.A total of 2 USB devices can be connected to the USB downstream connector to a printer equipped with UB-U01.

Note:

The UB-U01 hub is a power supply hub. Consequently, a bus power supply hub (including UB-U01) or a bus power supply function with a current consumption exceeding 100 mA cannot be directly connected to this connector. (A UB-U02 can be directly connected to a UB-U01 hub.)

5.Install a UB-U01/02 device driver on the host PC.

Note:

Please contact the dealer where you purchased the product for information on how to obtain device drivers and instructions on how to install them.

Connecting to an Ethernet interface

Be sure to note the following when using the Ethernet interface.

❏Use the same settings of the DIP switches as the parallel interface.

❏When turning on the power, the Ethernet interface board transmits the GS I and GS a ffh commands to acquire printer information.

❏Refer to the DIP switch setting section on page 1- 6 for the settings when using the Ethernet interface.

1-18Installation

Image 26

Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Key to Symbols Safety PrecautionsConfidential Related Software and Documents Moduler ConnectorAbout This Guide Developer’s Guide Appendix a Specifications Environment Specifications Installation and Positioning of TM-U230Selecting a Place of Installation External Dimensions Dip Switch Settings DIP Switch Serial InterfaceParallel Interface Ethernet Interface Settings for Horizontal Installation Changing the Location of the Rubber FeetChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Installation Wall MountingInstalling the wall mount Secure the mount to the wall using all the 10 screw holesAttaching the hangers Serial interface connections Connecting a Host PCAttaching the printer to the wall Connecting to a parallel interface Connecting to a USB interfaceConnecting to an Ethernet interface Ethernet test switch Names of partsEthernet LEDs Interface cable connectionsDrawer Kick-Out Connector Marked DK 22Installation Important Safety Information HandlingWaterproof Second Digit Ability to keep water out Waterproof mechanism Replacing roll paper Cutting roll paperPrinter is offline as long as the LED is flashing 6Handling Replacing the ribbon cassette Autocutter lock lever8Handling Removing paper jams Paper jams in the vicinity of the print head10Handling Be sure to properly secure the cover with the screw Paper jam in the auto cutter 11 Normal auto cutter positionInstalling the power button cover 12 Installing the power button cover14Handling Paper roll end settings Internal Buzzer2Compatibility Receive Buffer Mounted Mechanism 254, 255 SpaceSaving Space for Receipt Printing GS V Function BGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Printing Specifications Character SpecificationsPaper Specifications Autocutter SpecificationsPrinting Area Electrical SpecificationsEnvironmental Specifications Appendix A-4Specifications Figure A-4 Without the power supply cover External AppearanceAppendix A-6Specifications Specifications Appendix A-7 Limitations Drawer Kick-out ConnectorDrawer Kick-out Specifications Pin Assignment Drawer CircuitryAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation