Epson U230 manual Waterproof

Page 32

Confidential

CAUTION:

All cables are to be connected only as described in the manual. Incorrect connection could cause damage or a fire hazard.

Be sure to set this product on a firm, stable, horizontal surface. The product may break or cause injury if it falls.

Do not install the printer in extremely humid or dusty locations. Operation under such conditions could damage the printer or cause a fire or shock hazard.

Do not stand on the printer or place heavy objects on it. The printer could fall or collapse, causing breakage and possible injury.

For added protection of the printer, disconnect the power plug from the wall outlet when the printer is not to be used for an extended period of time.

Be sure not to touch the print head or motors when you remove paper jammed in the printer. Wait until the print head and motors have cooled down before removing jammed paper. When the printer has been used for an extended period, the print head and the motors are very hot and could cause burns.

Precautions in handling the fine coating of the case (only for Fine Coating Case model)

A fine coating is used for the external surface of the plastic case of the printer, which makes wiping and removing kitchen stains easy; however, you should note the following when cleaning the surface in order to preserve the quality of the coating (the metal plate and the inside of the case do not have the fine coating):

Do not scrub the surface with a hard object. Otherwise, the case will be scratched and harder to clean.

Do not use a cleanser that includes polishing materials such as grains of glass, metal, or ceramics. Otherwise, the case will be scratched and harder to clean.

Never use disinfectant, bleach, alcohol, benzine, thinner, chlorine solvent, or ketone solvent. Otherwise, the case will be harder to clean, and the case may be seriously harmed or even deformed and its color may be changed.

The label may come off of the fine coating of the case if harsh cleaning methods are used.

Waterproof

The TM-U230 is designed as a kitchen printer with protection from water. When it is installed vertically or horizontally, the printer meets the European Standards IEC 529 for protection against water of "keeps out water coming from an angle up to 15° from vertical, evaluating IP level. (The TM-U230 also meets the IEC Standards for protection from tools and thin wires with a diameter more than 2.5 mm and protection from solid foreign objects with a diameter greater than 2.5 mm.) The IP code of the TM-U230 when it is installed vertically or horizontally is IP32. The meaning of the "IP" numbers is described in the next section of this manual.

2-2Handling

Image 32
Contents Developer’s guide TM-U230 Confidentiality Agreement Revision Information Key to Symbols Safety PrecautionsConfidential Related Software and Documents Moduler ConnectorAbout This Guide Developer’s Guide Appendix a Specifications Environment Specifications Installation and Positioning of TM-U230Selecting a Place of Installation External Dimensions Dip Switch Settings DIP Switch Serial InterfaceParallel Interface Ethernet Interface Settings for Horizontal Installation Changing the Location of the Rubber FeetChanging the Orientation of Near End Sensor Attaching Switch Panel for Horizontal Installation Assembling the Power Box Vertical Installation Horizontal Installation and Wall Mounting Installation Wall MountingInstalling the wall mount Secure the mount to the wall using all the 10 screw holesAttaching the hangers Serial interface connections Connecting a Host PCAttaching the printer to the wall Connecting to a parallel interface Connecting to a USB interfaceConnecting to an Ethernet interface Ethernet test switch Names of partsEthernet LEDs Interface cable connectionsDrawer Kick-Out Connector Marked DK 22Installation Important Safety Information HandlingWaterproof Second Digit Ability to keep water out Waterproof mechanism Replacing roll paper Cutting roll paperPrinter is offline as long as the LED is flashing 6Handling Replacing the ribbon cassette Autocutter lock lever8Handling Removing paper jams Paper jams in the vicinity of the print head10Handling Be sure to properly secure the cover with the screw Paper jam in the auto cutter 11 Normal auto cutter positionInstalling the power button cover 12 Installing the power button cover14Handling Paper roll end settings Internal Buzzer2Compatibility Receive Buffer Mounted Mechanism 254, 255 SpaceSaving Space for Receipt Printing GS V Function BGS V Function C Printing direction Executing a cut Assumed A/C position Assumed head position 9999999999999999 Execute GS V 98 Usage of DirectIO in Opos Contorol of The Buzzer TM-U230 41=1B284105006164050A0A Printer.font.Name = ControlA Printer.Print a Printer.EndDoc Printing Specifications Character SpecificationsPaper Specifications Autocutter SpecificationsPrinting Area Electrical SpecificationsEnvironmental Specifications Appendix A-4Specifications Figure A-4 Without the power supply cover External AppearanceAppendix A-6Specifications Specifications Appendix A-7 Limitations Drawer Kick-out ConnectorDrawer Kick-out Specifications Pin Assignment Drawer CircuitryAppendix A-10 Specifications Appendix B Comparison table AppendixC-2 AppendixC-3 AppendixC-4 AppendixC-5 AppendixC-6 Confidential Seiko Epson Corporation